DoE solution for long distance transmission applications

19th November 2015

Joe Bush

0 0

A new Display over Ethernet solution has been introduced by Avalue which delivers an Embedded DoE System with Tx Module - EMS-BYT-DOE and Touch Monitor with Rx Module - IPM-15W0, IPM-1001 and IPM-1201. Display over Ethernet (DoE) is well suited for long distance transmission applications, which are integrated with a rugged fanless system (Tx Module) and IP monitor (Rx Module).

This technology features transmission signal via Ethernet cable (CAT5e) from box system to monitor. Through DoE technology, Ethernet cable is combined with PoE, HDMI, Audio and USB signal together, and supplies power up to 25.5W through the Ethernet cable. The Ethernet cable can support up to 100 metres connectivity. Moreover, users can connect one-to-many displays over a Giga switch. The DoE solution is designed to fulfil needs in the food industry, automation factory, kitchen and outdoor multi-media display applications.

Avalue’s DoE solution includes:

EMS-BYT-DOE, the fanless rugged display over Ethernet system, is powered by Intel Celeron J1900 4-core 2.0GHz CPU to provide low power consumption and high performance requirements. It supports one 204-pin DDR3L 1333MHz SO-DIMM with up to 8GB capacity. EMS-BYT-DOE offers a multiplicity of I/O involving 4 x USB 2.0, 1 x USB 1.0, 2 x COM ports, 1 x 2.5” drive bay, 1 x mSATA, 1 x PS2, 2 x mini PCIe slot, 1 x SIM card slot, 1 x 12-bit GPIO and 2 x Antenna mounting. EMS-BYT-DOE has dual Gigabit Ethernet: 2 x Intel I211AT and dual displays including 1 x DoE Tx (included display USB, COM, support PoE). Audio interface is provided with 1x Realtek ALC892 supports 5.1-CH. It supports a stable +12~+26V wide voltage input, with anti-interference capability and protects computers from overload short circuits.

IPM-15W0, the full flat stainless DoE monitor, is powered by the Aspeed AST 1510 Rx module and supports onboard 1GB DDR2 memory. It is equipped with a 15.6” WXGA (1,366 x 768) projective capacitive multi-touch DoE monitor. For the I/O port, IPM-15W0 has one waterproof RJ-45 connector, which is combined with PoE, HDMI, Audio and USB signal together. It comes with optional waterproof DC in the USB port when user connects IPM-15W0 to Giga switch without PoE function.

IPM-1001 and IPM-1201, the IP monitor for DoE solution, is powered by Aspeed AST 1510 Rx module and supports onboard 1GB DDR2 1066MHz memory. It is equipped with 10.4” (IPM-1001) and 12.1” (IPM-1201) XGA (1024 x 768) 5-wire resistive touchscreen. For the I/O port, IPM-1001 and IPM-1201 come with 1 x RJ-45 which support PoE (Power over Ethernet), HDMI and USB over IP Rx Module. It also supports a stable +12~+26V wide voltage input.