DFI unveil Mini-ITX supporting multiple expansion

The CM100-C embedded motherboard comes with 1 HDMI and 2 DVI (DVI-D signal) interfaces providing 3 independent displays for rich media embedded applications, and it also supports 5.1-channel High Definition Audio with S/PDIF audio interface. In the system memory, the CM100-C Mini-ITX form factor is designed with 2 204-pin DDR3 SODIMM sockets supported by DRAM device technologies for x8 and x16 devices to deliver the maximum performance up to 16GB at 1600MHz low voltage memory for faster communication between components.

The 2 Intel Gigabit LAN controllers integrate into the 1GB transceiver for increased transmission speed. The AMD A70M Fusion Controller Hub used on this new Mini-ITX motherboard offers higher performance and flexible I/O. The integrated Advanced Host Controller Interface controller supports 4 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s, and XHCI Host Controller supports up to 4 super speed USB 3.0 ports. Besides, the CM100-C embedded motherboard is also packed with 6 USB 2.0 ports, 6 Serial COM ports, 1 front audio connector for line-in, line-out and mic-in jacks, and 8-bit digital I/O connector for device controls.

The expansion design of this platform offers 1 PCIe x16 interface, 2 DFI Proprietary Extension Bus via a riser card and 1 Mini PCIe interface with PCIe and USB signals supporting half-size Mini PCIe card for customers to apply additional expansion capabilities. The trusted platform module provides a trusted PC for secure transactions in software license protection, enforcement and password protection. The CM100-C platform also operates at the temperature range from 0ºC to 60ºC and the humidity range from 10% to 90% to make it suitable for various environments.

Based on these combined features described above, this new Mini-ITX embedded motherboard, the CM100-C with AMD R-Series processors, is an ideal and remarkable product for a whole range of applications requiring a stable revision-controlled platform, such as ATM/POS machines, industrial control automation, digital signage use, and many more.

Key features:

• Mini-ITX form factor (170mm x 170mm),
• Supports AMD Embedded R-Series APUs,
• AMD A70M Fusion Controller Hub,
• Supports 2 DDR3 SODIMM up to 16GB at 1600MHz, dual-channel system memory,
• 1 HDMI and 2 DVI (DVI-D signal) interfaces support 3 independent displays,
• 2 Intel Gigabit LAN controllers,
• 6 Serial COM ports,
• 10 USB ports: 4 USB3.0, 6 USB 2.0,
• 4 Serial ATA 3.0 interfaces (6Gb/s),
• 8-bit Digital I/O connector,
• Supports 5.1-channel High Definition Audio via S/PDIF audio interface,
• 1 PCIe x16 interface,
• 2 DFI Proprietary Bus via a riser card,
• 1 Mini PCIe interface (PCIe and USB signals),
• Operating Temperature Range: 0°C to 60°C,
• Humidity Range: 10% to 90%,
• Trusted Platform Module - optional.