This reference design provides an overview on the implementation of a single-phase dual active bridge (DAB) DC/DC converter. DAB topology offers advantages like soft-switching commutations, a decreased number of devices and high efficiency. The design is beneficial where power density, cost, weight, galvanic isolation, high voltage conversion ratio and reliability are critical factors, making it ideal for EV charging stations and energy storage...

The FPD-Link Learning Center is a comprehensive online classroom for system designers integrating FPD-Link serialiser/deserialiser technology into their ADAS or infotainment applications. The on-demand curriculum offers subject matter, from basics to advanced, to widen the technical knowledge of experienced engineers as well as assist those who are just starting to design with FPD-Link serialisers and deseriali...

With LEDs being widely used in automotive applications, simple LED drivers are more and more popular. Compared to discrete solutions, a low cost monolithic solution lowers system level component counts and significantly improves current accuracy and reliability.

The LMR36520 regulator is an easy-to-use, synchronous, step-down DC/DC SIMPLE SWITCHER converter. With integrated high-side and low-side power MOSFETs, output current up to 2 A is delivered over a wide input voltage range of 4.2 V to 65 V.

The LM5143-Q1 is a 65-V synchronous buck DC/DC controller for high-current single or dual outputs. The device uses an interleaved, stackable, peak currentmode control architecture for easy loop compensation, fast transient response, excellent load and line regulation, and accurate current sharing with paralleled phases for higher output current.

The LM5180-Q1 is a primary-side regulated (PSR) flyback converter with high efficiency over a wide input voltage range of 4.5 V to 65 V. The isolated output voltage is sampled from the primary-side flyback voltage, eliminating the need for an optocoupler, voltage reference, or third winding from the transformer for output voltage regulation.

The TPS1HB08-Q1 device is a smart high-side switch intended for use in 12V automotive systems. The device integrates robust protection and diagnostic features to ensure output port protection even during harmful events like short circuits in automotive systems. The device protects against faults through a reliable current limit, which, depending on device variant, is adjustable from 6.4A to 70A or set at 94A.

The TMUX1111, TMUX1112, and TMUX1113 are precision complementary metal-oxide semiconductor (CMOS) devices that have four independently selectable 1:1, single-pole, single-throw (SPST) switches. Wide operating supply of 1.08-5.5V allows for use in a broad array of applications from medical equipment to industrial systems. The device supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins ranging from GND to VDD.

Significant technological advancements and high degree of integration in Medical imaging, especially hand-held ultrasound smart probes, are pushing engineers to come up with highly-efficient, noise immune power solutions in a small size. This reference design documents end to end power and data solution for our high performance 128-channel Tx/64-channel Rx ultrasound smart probe solution with TX7332 transmit chip and AFE5832LP receive chip.

The TPS55288 is a synchronous buck-boost converter optimised for converting battery voltage or adaptor voltage into power supply rails. The TPS55288 integrates two 16A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application.

The TPS55288 is a synchronous buck-boost converter optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS55288 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application.

The OPA1656 is a Burr-Brown operational amplifier (op amp) designed specifically for audio and industrial applications, where maintaining signal fidelity is crucial. The FET-input architecture achieves a low 2.9-nV/√Hz voltage noise density and 6-fA/√Hz current noise density, allowing for very low noise performance in a wide variety of circuits.

Join our webinar to learn what this new LPWAN standard is, and how it can help your business. MIOTY provides quality and scalability for worldwide Sub-1GHz communication. The webinar will discuss the benefit of using MIOTY compared to other LPWAN solutions. We will also present the wide range of applications that could benefit from MIOTY, including environmental sensors like temperature and air quality, and battery-powered flow meter sensors...

The TPS61372 is a full-integrated synchronous boost converter with the load disconnect built-in. The device supports output voltage up to 16V with a 3.8A current limit. The input voltage ranges from 2.5V to 5.5V supporting applications powered by a singlecell Lithium-ion battery or 5V bus.

The SN6505x-Q1 is a low noise, low EMI push-pull transformer driver, specifically designed for small form factor, isolated power supplies. It drives low profile, center-tapped transformers from a 2.25 to 5VDC power supply. Very low noise and EMI are achieved by slew rate control of the output switch voltage and through Spread Spectrum Clocking (SSC).

The TPS65987D is a stand-alone USB Type-C and Power Delivery (PD) controller providing cable plug and orientation detection for a single USB Type-C connector. Upon cable detection, the TPS65987D communicates on the CC wire using the USB PD protocol. 

Want to understand how high-voltage isolation technology works? Watch and learn about TI's capacitive isolation structure. This video describes how TI's reinforced isolation technology works and takes a deeper dive into details on how the capacitors are structured. 

This reference design is a 4.2W, single-channel, automotive 12V battery input flyback bias supply for IGBT/SiC isolated gate drivers. The supply accepts a wide input range of 4.5V to 65VDC. The output is configurable as +15V,–8V or +20V, –4V at loads up to 180mA for driving the IGBT/SiC MOSFET power modules.

UCC12050 is a DC/DC converter with 5-kVRMS reinforced isolation rating designed to provide efficient, isolated power to isolated circuits that require a bias supply with a well-regulated output voltage. The device integrates a transformer and DC/DC controller with a proprietary architecture to provide 500 mW (typical) of isolated power with high efficiency and low EMI.

There are few industrial markets undergoing a more rapid change and experiencing the impact of technological innovation, than the automotive sector. Whether it be ADAS, electric vehicles, V2V and V2X, power train, or battery management, applications for electronics technology within the humble car know no bounds. A team of experts from Texas Instruments’ automotive division recently assembled to discuss the latest trends in the market and t...