The introduction of the RSKN series of six, ten, 20A and 30A, 250Vac/250Vdc rated EMC filters has been announced by TDK Corporation. A two stage design delivers high attenuation across a wide 100kHz to 100MHz frequency range and provides protection against high voltage input pulses. The general purpose RSKN series is suitable for use in a wide range of industrial and communications applications.

A complete portfolio of VR sensors enabling a new class of highly accurate and affordable all-in-one VR solutions has been launched by TDK Corporation. The key platform components includes the InvenSense ICM-42688 six-axis motion sensor for HMDs, which provides the low noise figure and features high-resolution measurement mode.

The introduction of the TDK-Lambda brand PFH500F 28 high efficiency AC-DC power supplies, has been announced by TDK Corporation. Rated at 504W, the baseplate conduction-cooled module is packaged in a compact 101.6x61mm footprint. Using industry standard PMBus commands, the output voltage and fault management levels can be adjusted (read/write) and product status read back.

It has been announced that TDK Corporation is expanding its Chirp Microsystems ultrasonic product portfolio with Chirp SonicTrack, an ultrasonic six-degree-of-freedom (6-DoF) controller tracking solution for all-in-one virtual reality systems. Chirp SonicTrack is an inside-out tracking system that fuses ultrasonic and inertial sensor data to provide 6-DoF position and orientation tracking of a hand-held controller with sub-millimetre precision ov...

It has been announced by TDK Corporation that it is introducing the TDK-Lambda brand DRF960 24 1 DIN rail mount AC/DC power supply, rated at 24V 40A (960W) with a 60A (1,440W) peak for four seconds. The product has a very narrow 110mm width, freeing additional space for other DIN rail mount assemblies.

TDK Corporation (TSE 6762) has announced the introduction of the TDK-Lambda brand DTM250-D external power supplies rated at 250W output power. Certified to both 60601-1 (medical) and 60950-1 (ITE) standards, the series also meets the latest EU CoC (Code of Conduct) Tier 2 and US DoE Level VI efficiency standards. Applications include B and BF rated medical products, test, measurement and portable communications equipment.

The introduction of the TDK-Lambda brand DTM110-C8 Class II (no ground wire needed) external power supplies rated at up to 110W output power has been announced by TDK Corporation. Certified to the IEC 60601-1 (medical) and IEC 60950-1 (ITE) standards, the series also complies to the latest EU CoC (Code of Conduct) Tier 2 and US DoE Level VI efficiency standards.

The introduction of 3.3V, 4.2V and 28V output models to the TDK-Lambda brand CUS200LD series of AC/DC power supplies has been announced by TDK Corporation. Rated from 79 to 120W with convection cooling and 99 to 151W when mounted on an aluminium plate for conduction cooling, the series can deliver up to 206W for ten seconds.

  The introduction of the TDK Lambda brand 15 and 30W rated CCG-D dual output DC/DC converters has been announced by TDK Corporation. Like the single output CCG15-S and CCG30 S, the products have the industry standard one by one inch footprint and can operate over a wide 4:1 input range.

TDK introduce the TDK-Lambda brand EZA11K-320240 bi directional DC-DC converters, suitable for use with energy storage systems. Rated at 11kW, this 1U high product will operate off a 240 – 400Vdc source from a high voltage grid and provide 150 – 300Vdc for charging lithium ion batteries. When grid power is not available, the converter will seamlessly transition to drawing stored energy from the batteries to deliver DC power back to th...

TDK introduce of 1,700W rated models to the TDK-Lambda GENESYS+ series of programmable DC power supplies. These additional units provide the capability of operating from a single phase wide range ac input of 85 to 265Vac, rather than three phase 208/400/480Vac. Applications for these lower wattage supplies include laboratory use as well as component, automotive and aerospace testing, semiconductor fabrication, solar array and battery simulation, ...

TDK announce construction of a new £1M EMC test facility located adjacent to its power supply manufacturing plant in Ilfracombe, North Devon. Due to open in spring 2019, the building will house an anechoic chamber for onsite EMC compliance testing of its products.

The introduction of the CUS1500M series of 1500W rated AC-DC power supplies, has been announced by TDK Corporation, extending TDK-Lambda’s 30 to 350W CUS-M range. With medical and ITE (Information Technology Equipment) certifications, these seven year warranty products feature low acoustic noise (<45dBA) and meet class B radiated and conduction EMI standards.

The introduction of high power GSP models to the TDK Lambda GENESYS+ series of programmable DC power supplies has been announced by TDK Corporation. This expansion now provides 2U high 10kW and 3U high 15kW versions with output voltages and currents of up to 0 10V/1,500A to 0-600V/25.5A.

TDK Corporation has expanded its tool chain for the easy programming of various Micronas Hall-effect sensors with the Magnetic Sensor Programmer MSP V1.0. It replaces the APB 1.5 and complements the existing programmer line, which comprises the USB-Programming Kit V1.01 and the HAL APB V5.1. These programmers are especially designed for use in the development laboratory.

The introduction of five new models to the TDK‑Lambda brand 5kW GENESYS+ series of high power density programmable DC power supplies has been announced by TDK Corporation. This expansion now provides incremental and seamless choices in output voltage and current ranging from 0‑10V/500A to 0‑600V/8.5A. Initially launched in 2017, the GENESYS+ provides higher efficiency, improved performance and is functionally compatible with TDK-L...

  The MAF1005G series of noise suppression filters for audio lines has been expanded by TDK Corporation, with four new MAF1005GAD-D types, which, thanks to their low DC resistance, feature a high rated current of up to 1.25A. 

TDK has developed the new MPZ0603-H series of multilayer chip beads for power lines in an IEC 0603 package (EIA 0201) that feature twice the rated current and about half the DC resistance of the existing MPZ0603-C series. Thanks to a newly developed technology for the internal electrodes, TDK was able to reduce the DC resistance to as low as 36mΩ, thus increasing the rated current to as high as 1900mA.

  TDK has announced the introduction of ten models with a 5V 1A standby voltage option to the TDK-Lambda brand RWS1000B and RWS1500B series of AC-DC industrial power supplies. This new feature is suitable for general industrial, communications, test and measurement and alternative energy applications.

TDK has announced the introduction of the 100W rated TDK-Lambda brand CUS100ME series of medical and industrial AC/DC power supplies. The series delivers 75W in ambient temperatures of up to 85°C with just 1m/s airflow, however, with conduction cooling, it can provide full power at up to 70°C. Target markets include home healthcare, medical, dental, test and measurement, broadcast and industrial equipment.