First Sensor extends its range of optical sensors with innovative solid-state Silicon PhotoMultipliers (SiPMs) for the detection of ultra-low light levels down to single photons. Compared to conventional photomultiplier tubes, SiPMs offer significant advantages such as low operating voltage, excellent temperature stability, immunity to magnetic fields and a much smaller size for easy system integration.

First Sensor presents the new Sensortechnics LDE ultra-low pressure sensors with ranges from 25 Pa (0.25 mbar) full scale. The digital sensors use a special compensation technology to achieve excellent offset stabilities better than 0.1 %. These flow-based differential pressure sensors include a microcontroller for precision digital signal conditioning and accomplish very high accuracies. A digital SPI bus and analogue output is available at the ...

First Sensor presents the new Sensortechnics HMA pressure sensors with ranges from 100 mbar up to 10 bar full scale. The sensors feature a special construction where all sensitive electrical components are arranged exclusively on one side of the piezoresistive sensor element. Thereby the HMA series achieves increased media compatibility on one pressure port to measure gases and liquids.

Sensortechnics now offers custom piezoresistive pressure sensors with very high resolution and accuracy from 2.5 mbar full scale. A high-quality, low noise amplifier and subsequent 24 bit A/D converter provide for high resolution digital signals comparable to analog signals and high signal-to-noise-ratios.

Sensortechnics’ LBA series offers differential low pressure sensors based on thermal mass flow measurement of air through a micro-flow channel integrated within the silicon sensor chip. The sensors are ideal for differential pressure flow measurement where the pressure drop across a flow element is a measure of the volumetric flow rate. For high performance medical respiratory devices it is essential to detect very small flows around the zero f...

As a leading sensor expert in the development, manufacture and distribution of high quality pressure sensors and sensing systems Sensortechnics offers its customers extensive technical consultancy.

Sensortechnics’ HCLA pressure sensors measure ultra-low gage or differential pressures from 2.5 mbar Full Scale. The sensors perform precision digital signal conditioning and achieve very high accuracies.

Sensortechnics’ new SSO stainless steel pressure sensors accurately measure gage or absolute pressures in ranges from 200 mbar up to 35 bar. Fully welded, media isolated rugged stainless steel constructions with G 1/8 (BSP) threaded pressure ports allow for high media compatibility with corrosive liquids and gases. These devices are precision calibrated and temperature compensated and offer excellent repeatability as well as long-term stability...

Sensortechnics offers OEM customers complex custom sensing and fluidic control systems for assembly into medical devices, instrumentation equipment and demanding industrial machines. These modules can integrate components such as sensors (e.g. pressure, flow, temperature, humidity), valves, pumps, microcontrollers, reservoirs, accumulators etc. to form compact OEM subsystems. The use of plastic manifolds enables the three-dimensional configuratio...

Sensortechnics’ new SSI stainless steel OEM pressure sensors accurately measure gage or absolute pressures in ranges from 200 mbar up to 35 bar. These devices offer excellent stability and repeatability, achieving a Total Error Band (TEB) better than ±1.5 %FSS over a temperature range of -20…+85 °C. Sensortechnics’ SSI pressure sensors use precision digital signal conditioning and provide both analog 0.5…4.5 V output as well as digital ...

Sensortechnics’ new LBA series offers differential low pressure measurement with ranges of 250 and 500 Pa Full Scale. The LBA sensors perform fully analog on-chip CMOS signal conditioning to allow for linear and temperature compensated outputs with high differential pressure resolution of typ. 0.1 % and fast response times of typ. 1 ms.

Sensortechnics GmbH expands its product portfolio of fluidic control devices as Certified Distributor of miniature liquid and pneumatic diaphragm pumps from the Hargraves Technology Corporation. As a leading supplier of high quality sensors, actuators and custom sensor designs as well as integrated sensing and fluidic control systems these new products add to the existing range for OEM device manufacturers in the medical, analytical, laboratory a...

Sensortechnics’ HDI sensors measure absolute, differential or gage pressures in various ranges from 10 mbar up to 5 bar. The HDI series features 3 V supply versions which are ideally suitable for battery powered applications, e.g. in portable or handheld devices. HDI pressure sensors perform precision digital signal conditioning and achieve ultra high accuracies with an excellent Total Error Band (TEB) better than ±0.5 %FSS over a temperature ...

Sensortechnics introduces the new 2-way and 3-way Ten-X solenoid valves. The Ten-X series is available with integrated 'Hit and Hold' drive electronics which significantly reduces the power consumption and heat generation using pulse width modulation (PWM). These lightweight miniature valves are ideally suited for many portable, medical and analytical device applications.

Sensortechnics’ new CLW series detects point levels of liquids and granular or pulverised materials without contacting the media. The user can easily adjust a high and low switch point with a hysteresis of less than 25 mm. The CLW device uses a new non-invasive capacitive sensor technology and allows for complete media compatibility and sterility. Due to its miniature size these level switches can be perfectly integrated into OEM devices.

Sensortechnics' HDI series performs precision digital signal conditioning to achieve ultra high total accuracies. An internal ASIC compensates sensor offset, temperature effects and non-linearity to allow for an excellent Total Error Band (TEB) better than ±0.5 %FSS. The pressure sensors provide digital interfaces with I²C bus protocol and analog 0.5 ... 4.5 V output signals.

Sensortechnics’ introduces the new OLP series of miniature optical liquid level switches. These very cost-effective point level sensors measure the presence or absence of liquid in a wide range of OEM applications.

Sensortechnics’ new HCA Baro series offers OEM customers high precision barometric pressure measurement with simultaneous digital and analog output signals. They comply with the I2C bus protocol and can directly communicate with microcontrollers or microprocessors. Custom specific outputs, SPI bus or switching outputs are available on request.