Saelig announces the availability of the emPC-A/RPI3 Industrial Controller based on the ubiquitous Raspberry Pi 3. It includes many extra features that expand the usefulness of the Raspberry Pi computer for industrial applications, such as a CANbus interface. An enhanced version of the tried-and-tested emPC-A/RPI2, the emPC-A/RPI3 has been designed especially for automation and control applications.

Saelig has announced the 1908 and 1908P Digital Multimeters (DMMs) - high accuracy, high resolution dual-measurement benchtop instruments with USB and other optional interfaces. Additional features include frequency, capacitance, and temperature measurements, as well as a wide range of math and data logging functions. Unlike most high performance bench multimeters, these DMMs include internal rechargeable batteries for 'use anywhere' versatility.

  Saelig introduces the USB-232-K and USB-485-K, isolated USB to serial converter cables that are ideal for computers which do not have a serial port, or where an extra serial port is required. The USB-232-K is an isolated USB-to-RS232 converter, while the USB-485-K is an isolated USB-to-RS422 /485 converter.

The PSU-series of single output programmable switching DC power supplies that can provide up to 200A current and cover a power range up to 1520W has been announced by Saelig Company. These high efficiency, high power density supplies include five models from 6 to 60V rated voltages. The PSU-series can be connected in series for increased power capacity: up to two units in series or up to four in parallel to cover a broad coverage of applications.

The Siglent SDG1000X Series of Function/Arbitrary Waveform Generators which output sine, square, ramp, and pulse waveforms to 60MHz with a 14-bit sampling rate of 150MSa/s at up to +/-20V has been introduced by Saelig. The generators feature Siglent's patented EasyPulse technology for low jitter and very fast rising and falling edges that are frequency-independent even at low duty cycle settings.

The TGP3100 series of true pulse generators from Aim-TTi can generate precision pulses from 1mHz up to 50MHz with pulse width and delay resolutions of 100 psec. They are on sale at Saelig. Single and dual channel models are available, both featuring large graphic LCDs for simultaneous text and waveform information.

A new entry in the stable of the Rigol DSA800 spectrum analyser Series has been announced by Saelig. The DSA832E is a high performance, economical, and compact 9kHz to 3.2GHz instrument. A tracking generator function is available with the "-TG" model. The digital IF circuitry guarantees reliability and performance that meets the most demanding RF applications.

A Universal USB Charging Board which allows users to charge and/or sync up to 16 USB2.0 devices simultaneously at manufacturer-approved speeds and at up to 2.1A per port is on sale at Saelig. The Cambrionix U16S allows the charging of multiple device types simultaneously, irrespective of manufacturer, such as tablets, ChromeBooks, mobile phones, MP3 players, e-readers, 3D Glasses, etc.

A bench-top dual-channel DC-coupled wideband amplifier from Tabor, designed for high-frequency and high-current signal amplification is available from Saelig. With a wide bandwidth of 45MHz, and delivering 34Vpk-pk output into 50 ohms with up to 10W output power, the 9260 is an ideal complimentary amplifier to any signal source that needs a supporting power boost for demanding applications.

A network-attachable USB charge and sync device that allows multiple USB devices to connect with an Ethernet network, simplifying remote software and firmware updates has been introduced by Saelig. The Cambrionix EtherSync is available with multiple USB ports which can be used with all types of USB-based peripheral devices, tablets, and smartphones.

The RFP Smart Fieldmeter Kits contain all that is needed for making calibrated RF field strength measurements from 0.2MHz to 18GHz, including a calibrated field strength meter, a calibrated Omnifield Antenna, and a 6in table tripod. Designed for budget-conscious RF engineers, the RFP Smart Fieldmeters, available from Saelig, combine the major features of professional quality test equipment with the convenience and simplicity of a multimeter.

The PIE 850 Multifunction Calibrator - a high performance handheld instrument that combines eight single function calibrators, legacy 10 to 50 mA capabilities, and advanced troubleshooting tools is available at Saelig. The calibrator is a loop detective that is capable of diagnosing common loop control problems that are hard to find.

LIN-I/O is a communication adapter designed as an interface between automated production lines and a LINbus product available from Saelig. Designed for fixed installation on a DINrail or in a control cabinet, LIN I/O communicates remotely with a controller either via high-speed CAN and/or 24V digital I/O.  Using the LIN I/O, a test device can be communicated via the LIN I/O communications in a safe, short-circuit protected manner.

An IC that converts a USB interface into an SDIO Host Interface, suited to SD or microSD cards has been launched by Saelig. The VUB300 is a single-chip USB-to-SDIO hardware bridge that allows SDIO- and SD-compliant devices to be connected to any host PC via its USB port. The VUB300 is the ideal solution when a target system has no spare SDIO ports but does have available USB ports.

An economical 30MHz to 5GHz software-programmable RF mixer which can up-convert or down-convert from Windfreak features a built in Local Oscillator (LO) that is controlled and powered by a PC running Windows XP, Windows 7 or 8 via its USB port.  The RF I/O ports can accommodate RF signals in the 30MHz to 5GHz range, but the built-in local oscillator can be adjusted from 85MHz to 5GHz in 1Hz steps using an advanced sigma-delta modulator phase...

The SynthNV is a programmable 34.4MHz to 4.4GHz software-tunable RF signal and sweep generator with a built-in RF power detector. It is controlled and powered from any device running Windows, Linux or Android OS via a USB port and is available at Saelig. The included onboard RF power detector can be used as a generic RF power meter or combined with the SynthNV's sweep function to create a basic RF network analyser.

The USB-stick-sized TDDS100-48 - a laboratory quality Direct Digital Synthesised RF signal source – is available at Saelig. It has a frequency range of 1Hz to 100MHz and a minimum of 0dBm output power that is available from its SMA female socket. The high purity source can be swept in steps as low as 1Hz between any two frequencies in its specified range.

The SynthHD Dual-channel RF Signal Generator is a portable device that brings low cost to precision microwave signal generation. It is a compact software-tuneable, dual channel RF signal generator which can be controlled by a Windows or Linux PC via its USB port, or run as a standalone generator. Manufactured by Windfreak Technologies, it is available from Saelig.

A full-featured spectrum analyser designed to analyse wireless signals in real-time (not progressively scanned) has been unveiled by Saelig. The feature is essential for seeing intermittent and frequency-hopped signals. The RTSA7500 has all the standard features of a sophisticated, expensive bench-top spectrum analyser, but at lower cost as it uses a PC for the display and processing power.

Saelig has availability of the TBPS01-TBWA2 EMC Probe Kit, which includes investigative near-field probes and a wideband amplifier to increase the versatility of economical spectrum analysers to identify EMC issues.  The Probe Kit consists of four rubber-handled near-field probes (three H-field and one E-field), a 20dB or a 40dB wideband amplifier, and associated cables, supplied in an attractive wooden case.