Rohde & Schwarz has enhanced its R&S THU9 transmitter family to deliver even higher maximum output power. The ATSC standard has been included to make the transmitters perfectly suited for the North-American market. The transmitters are available in the same power range as the inductive output tube transmitters currently used there.

Radiated emissions from the cable TV infrastructure can cause interference in cellular LTE networks. The R&S EFL110 and R&S EFL210 cable TV analyzer and leakage detectors detect these electromagnetic emissions quickly, accurately and cost-effectively. Using the R&S EFL110 and R&S EFL210 portable TV test receivers, cable TV network operators can now locate the loose connections or damaged shielding that can generate unwanted emissi...

Rohde & Schwarz adds the R&S BBA150 for the microwave range to its EMC portfolio. These compact, lightweight amplifiers with their state-of-the-art design are optimized for high frequencies starting at 0.8 GHz. The first model in the R&S BBA150 family covers the 0.8 GHz to 3 GHz frequency band and is available with an output power ranging from 30 W to 200 W.

Fast, precise, highly linear – Users working with a frequency range over 67 GHz now also benefit from the unique features of the thermal power sensors from Rohde & Schwarz. The new R&S NRP-Z58 is the world's first power sensor that covers the frequency range continuously from DC to 110 GHz. Rohde & Schwarz has added the R&S NRP-Z58 to its successful portfolio of power sensors.

More and more devices are using wideband interfaces that operate in the 2.4 GHz band. Starting in 2015, new certification tests will be mandatory for manufacturers of devices that use this frequency band and are sold in the European Union.

Rohde & Schwarz announce that it is collaborating with Dolby Laboratories to provide audio test technology to Dolby and its licensees. Rohde & Schwarz has updated its R&S UPP and R&S UPV audio analyzer platforms with new firmware that enables Dolby licensees to perform compliance self-testing and simplifies configuration management, at no additional cost to Dolby licensees.

In many of today's industry sectors, including the development of power supplies or embedded hardware, the introduction of market-ready products is not possible without precise power measurements. Their top sensitivity makes the Rohde & Schwarz oscilloscopes ideal for this application. The company offers high-voltage probes and current probes as well as a new deskew fixture presented at the 2013 embedded world trade fair.

LTE Release 9 adds several new features to LTE, such as evolved MBMS, dual-layer beamforming (transmission mode 8) and positioning support. To support network-based positioning estimation, new reference signals known as positioning reference signals have been introduced. This webinar covers the technological background of the different positioning methods supported in LTE in addition to Assisted GPS.

Rohde & Schwarz presented world's first power sensor from DC to 110 GHz at the European Microwave Week 2012. The R&SNRP-Z58 thermal power sensor provides outstanding linearity and maximum accuracy for power measurements from DC to 110 GHz. The sensor is equipped with a 1 mm coax connector, and can be connected directly to a Rohde & Schwarz test instrument, a power meter base unit, or via USB to a laptop or PC.

Rohde & SchwarzRohde & Schwarz UK has acquired HAMEG UK to further grow the offering of general purpose test equipment to its customers. “This acquisition gives UK HAMEG customer’s access to Rohde & Schwarz’ local customer support and service centre,” said Richard Bloor, Business Development Manager of Rohde & Schwarz UK.

Rohde & Schwarz has enhanced its fully integrated R&S SGS100A by adding a model for I/Q modulated signals from 80 MHz to 12.75 GHz. Combined with an I/Q baseband generator, the instrument can be used to generate test signals for all radio standards in this frequency range.

At the electronica trade fair in Munich, Rohde & Schwarz (hall A1, stand 315) places the focus on its new R&S ESR EMI test receiver, the fastest instrument of its kind on the market. In addition, the company presents a new microwave spectrum analyzer and solutions for new test requirements such as the analysis of multistandard signals in wireless communications. And visitors can also get a first-hand look at the oscilloscopes and their new option...

At the ILA Berlin Air Show, Rohde & Schwarz will for the first time present a communications intelligence system for airborne deployment to the public. Used in border protection, maritime rescue operations or military missions, for example, the onboard system always reliably detects, identifies and locates radio signals.

Rohde & Schwarz have today announced the release of the new R&S ESR EMI test receiver whose broadband architecture allows standard-compliant EMI measurements up to 6000 times faster than other solutions. Comprehensive diagnostic tools such as spectrogram display, realtime spectrum analysis and IF analysis help developers detect and eliminate EMI. The R&S ESR is impressively easy to use thanks to its intuitive touchscreen interface.

Rohde and Schwarz oscilloscopes are designed for engineers who need the most reliable and accurate representation of the signals they are analyzing. Discover some of the key parameters of an oscilloscope and how they impact on the performance in this video series

Are you familiar with PRACH measurements? And what about power dynamics? This Rohde & Schwarz webinar from March 2011 focuses on the amendments made to 3GPP TS 36.521-1 and explains the enhanced test definitions. The webinar illustrates on the Rohde & Schwarz CMW500 wideband radio communication tester how the specified RF test cases can be performed and automated, and how the results can be interpreted.

Measuring instruments used in commercial test systems for applications such as testing of mobile radio base stations typically have a much higher lifespan than the test system itself. Some five to seven years of usage is normal prior to replacement.

Rohde & Schwarz completes its own substantial portfolio in Spectrum and Signal Analyzers by the new U3800 2-channel Vector/Spectrum Signal Analyzer from Advantest. Introducing this powerful measurement tool the company addresses the dramatically increasing information traffic which leads to the more effective use of the available frequency resources, new transmission technologies, multi-use frequencies and intelligent routing techniques.

Whether in the R & D lab or in production, the global navigation satellite system (GNSS) solution for the R&S SMBV100A sets new standards in the field of satellite simulation. The GNSS simulator supports all possible scenarios, from simple setups with individual, static satellites all the way to flexible scenarios generated in realtime with up to 24 dynamic GPS (C/A and P code), Glonass and Galileo satellites.

This video explains some of the test and measurement challenges that arise due to the new LTE Release 10 (LTE-Advanced) uplink features 'clustered PUSCH' and 'simultaneous PUSCH/PUCCH transmission'. Additionally, it demonstrates how to set up a vector signal generator from Rohde & Schwarz, such as the R&S SMU200A, to generate standard-compliant LTE Release 10/LTE-Advanced uplink signals.