UK power conversion specialist PowerPax has recently extended its range of 3W AC/DC module power supplies with the addition of the Ultra-wide input LS03-16BxxSS and LD03-16Bxx series products from power conversion manufacturer Mornsun. This range features an ultra-wide input range of 90 – 528V AC (47-63Hz) and can accept a DC input of 100 – 745V DC on the same terminals.

UK power conversion specialist PowerPax has recently extended its LED Driver offering with the addition of an Ultra Slim 60W constant voltage series. The range features an input voltage range of 200–240V AC, 50Hz with a power factor ≥ 0.9 and an output power rating of 0-60W (SELV). Outputs are available as either 12VDC or 24VDC and all include open circuit, short circuit, overload and over-temperature protection.

UK power conversion specialist PowerPax has recently extended its specialist DC converter range with the addition of the PVxx-29Bxx series of Isolated, Ultra-wide input products from Mornsun. This series of products feature an input range of 200 – 1500V DC with 400V AC input to output isolation. They are available in 10W, 15W and 40W models with single, regulated, outputs of 5V, 12V, 15V and 24V.

UK power conversion specialist PowerPax has extended its offering of PCB Mounting AC/DC module power supplies with the addition of the 5W, medically approved, LD05-20BxxMU series from Mornsun. The series features single outputs of 5V DC, 12V DC, 15V DC and 24V DC with output voltage accuracy of ±2% typical, line regulation of ±0.5% typical and ripple & noise of 100mV peak to peak max (20Mhz Bandwidth).

Extending its LED driver offering, PowerPax has announced the introduction of a 20W constant voltage series. The range features an input voltage range of 200-240VAC, 50Hz and an output power rating of 0-20W. Outputs are available as either 12 or 24VDC and all include short circuit and overload protection.

The K78 1A series of non-isolated switching regulators from Mornsun are now available at PowerPax. This new range complements the 500mA series and extends the range of application for this product family. This series is designed to meet the greater current requirements found in many applications and is provided in a 3-Pin SIP package that is compatible with the standard linear LM78XX (TO-220 package) regulator.

A series of medical DC converters, the ‘G&H’ series, has been launched by PowerPax, from global power conversion manufacturer Mornsun. This range features un-regulated dual output, G series and single output, H series, parts in both 1 and 2W variants in an industry standard SIP package which is manufactured of black flame-retardant and heat resistant plastic (UL94 V-0 rated).

Claimed to offer significant operating improvements to reduce energy consumption for today’s electronics systems, the R3 series of DC converters from Mornsun, are available from distributor PowerPax.

UK Power Conversion distributor PowerPax has launched the Mornsun LHxx-13Bxx, 5 – 25W range of AC/DC Converters which accept an AC input range of 85 – 305VAC (47-63Hz) and a DC Input range of 100 – 430V DC with six models featuring outputs from 3.3V to 24V DC. This series offers a high power density in a compact package with industry standard footprints and efficiency of up to 87% with standby power consumption of 0.3 watts maxi...

PowerPax has recently completed an extensive exercise to update the efficiency and no-load power consumption of its entire core product range to ensure compliance with the latest DOE Level VI and EU CoC Tier 2 energy efficiency requirements. These requirements are currently mandatory in the USA and products specific to this market were completed towards the end of 2015.

UK power conversion distributor PowerPax has launched the Mornsun 5W LD05-23Bxx series of PCB mounting AC/DC switching power supplies that feature an Ultra-Wide range input accepting both AC and DC. This series has an input range of 85-305V AC (47-440Hz)/ 100 – 430V DC and features six models with outputs from 3.3V to 24V DC.

Expanding the company's portfolio of DC/DC converters, PowerPax have released the second generation 6PURB_YMD and 6PURA_YMD series of 6W units. With dimensions of only 25.4x25.4mm (1x1”), the converters occupy minimal board space and provide a marked improvement in efficiency over the previous generation - up to 88%.

Providing constant current outputs of 300, 350, 500, 600 or 700mA, PowerPax has announced the introduction of the PLC24RT series of SMD (surface mount) LED drivers with DC input. Designed for driving high power LEDs, the series features remote ON/OFF, PWM dimming, analogue dimming and short circuit protection.

A range of miniature AC/DC power supplies, the PS05 series, has been launched by PowerPax. The 5W PCB mount power supplies, which are IEC60950/EN60950/UL60950 safety approved, features MTBF ＞300,000 h at 25℃. Measuring 42 x 27 x 11mm, the compact devices occupy very little board space and the class II design offers 3000vac input to output isolation (testing for 1 Min).

PowerPax launch the latest in their comprehensive range of desktop power supplies with the new 310W series. Believed to be the first manufacturer to offer a range of single output inline external power supplies rated at over 300W, this new series includes models from 12vdc to 56vdc, including core products such as part number SW4604 rated to 12vdc 20.83A (250W), part number SW4605 which offers 24vdc 11.25A (270W) and part number SW4606 which prov...

PowerPax UK is pleased to today announce the launch of a new series of 1W and 3W Single in-line PCB mounting switch mode power supplies with the addition of the PS01 and PS03 products to its successful range of AC-DC power modules. Designed to provide a solution to requirements for low power AC to DC conversion in a compact package these single output PCB mount power supplies are feature packed.

PowerPax UK Ltd is pleased to announce the extension of its range of LED drivers with the addition of a new comprehensive series of high power, IP67 rated, waterproof LED drivers.

PowerPax is pleased to announce the extension of its USB power supply range with the addition of a new comprehensive series featuring single or twin USB sockets. USB power supplies feature high efficiency, full safety approvals and an ultra compact design launched with single or twin sockets.

PowerPax has today revealed that it is extending its AC module product range with the addition of a new series of Chassis and DIN Rail mounting options in the range of 5 - 25W. The range features Universal Input (85 - 264V AC, 50/60Hz) and efficiencies of up to 85%.

Believed to be the smallest, fully functional, universal input, switch mode power supply solution available the BIAS Power product series from PowerPax UK Ltd is available in output powers of 0.5W, 1.0W, 2.0W and 4.0W with universal AC input (85-265VAC). These power supplies provide good levels of efficiency and have low no-load input power of