Pickering Interfaces is expanding its range of 3U PXI RF/Microwave solutions with the introduction of 4 new solutions with frequency coverage to 6GHz. The 40-880 is a 10MHz to 6GHz solid state SPDT switch available as dual, quad, hex and octal configurations. The 40-881 is a 10MHz to 6GHz solid state SP6T available as a single or dual version. The 40-882 is a 10MHz to 6GHz solid state SP4T switch available in single, dual, triple or quad configur...

Pickering Interfaces, has continued in 2011 to regularly release a steady flow of new products in both the LXI and the PXI platforms. And - in addition all Pickering Interfaces LXI products are now fully LXI compliant to the latest 1.4 specification. Pickering Interfaces is committed to following the LXI standard’s evolution and adopting its newest features to improve user experience of Ethernet controlled instrumentation.

Pickering Interfaces is expanding its range of 3U PXI RF/Microwave solutions with the introduction of 4 new solutions with frequency coverage to 6GHz. The 40-880 is a 10MHz to 6GHz solid state SPDT switch available as dual, quad, hex and octal configurations. The 40-881 is a 10MHz to 6GHz solid state SP6T available as a single or dual version. The 40-882 is a 10MHz to 6GHz solid state SP4T switch available in single, dual, triple or quad configur...

Pickering Interfaces is expanding its range of 6U PXI matrices with the introduction of the 45-541 and 45-542 high density matrices. The 45-541 is a reed relay matrix occupying one slot of a 6U PXI chassis which provides a 132x8 matrix that supports 0.5A switching and up to 10W hot switch capacity. User connections are provided through easy to use 50 way D Type connectors.

Pickering Interfaces is expanding its range of PXI RF switches with the introduction of the 40-754 SPDT switch module. The 40-754 supports up to 17 off SPDT RF switches in a single module and is available in two different versions based on a common switch design.

IEEE AUTOTESTCON is the United States' largest conference focused on automatic test equipment for U.S. military systems, and has been held annually since 1965. The conference is held in Baltimore this September, all themes focused precisely on the current issues facing military automated test. Pickering Interfaces has continued in 2011 to regularly release a steady flow of new products in both the LXI and the PXI platforms. And - in addition all ...

Pickering Interfaces is expanding its range of LXI switch solutions with the introduction of the 60-590 high density matrix.

Pickering Interfaces has continued in 2011 to regularly release a steady flow of new products in both the LXI and the PXI platforms. According to Nick Hickford, Sales Manager UK and Ireland , “LXI enquiries have been particularly strong in the last 6 months as more and more users are realizing the benefits of this platform. These enquiries are leading to a steadily increasing number of switching solutions being made available by Pickering Inter...

Pickering Electronics is expanding its range of reed relay products with the introduction of a new two pole Single-in-Line (SIL) 117 series relay.

Pickering Interfaces is expanding its range of PXI Fault Insertion solutions with the introduction of the 40-197 and the 40-198. Fault Insertion (FI) modules are used within an Automatic Test System to simulate common fault conditions such as an open, short to ground or a short to other connections in a device under test.

Pickering Interfaces has continued to regularly release new products in both the LXI and the PXI platforms tackling the problems faced by our users in the Automotive industry.

Pickering Interfaces have published their first full catalogue of LXI switching products running to over 150 pages and is available in either printed or downloadable from Pickering’s web site.

Pickering Interfaces is expanding its range of PXI battery simulators with the introduction of the 41-753.

Pickering Interfaces has continued in 2010 to regularly release a steady flow of new products in both the LXI and the PXI platforms. Amongst a variety of products, these latest models deserve attention and will be shown at Autotestcon;

Pickering Interfaces is expanding its range of PXI power supply products with the introduction of the 41-743. The 41-743 is a single channel power supply capable of providing 2A at output voltages up to 20V and 0.8A up to 48V. The powers supply includes remote sense connections to allow load sensing at the end of cables.

Pickering Interfaces is expanding its range of PXI switching products with the introduction of the 40-737 USB switch.

Pickering Interfaces is expanding its range of customer focused PXI solutions with a range of new solutions and upgrades to existing modules covering PXI interfacing, fault insertion, RF and high current applications.

Continuing its policy of providing a truly global service for its customers, PXI solutions provider Pickering Interfaces is improving its support in Russia with the appointment of Sovtest ATE as its local Russian distribution partner. Aimed at serving both existing electronics manufacturing sites in Russia as well as companies who are moving into the region, Sovtest ATE will provide sales and service representation for Pickering's comprehensive P...

In an effort to enhance customer's choices and options when designing PXI systems, Geotest- Marvin Test Systems, a global producer of PXI and PC-Based test equipment and test solutions, and Pickering Interfaces, a global market innovator in signal switching and conditioning, announced today that they are embarking on a Strategic Alliance program.

Pickering Interfaces is expanding its range of LXI compliant products with the introduction of a new LXI High Voltage matrix, 60-311. The 60-311 is a matrix designed for high voltage switching applications. Designed to withstand voltages up to 1kV with up to 2A of carry current, the 60-311 provides a dense and cost effective solution to matrix switching solutions where high user voltages may be encountered. The LXI Class C compliant device uses...