In developing the new ‘UNITEC’ range, OKW has designed an enclosure system that can be used for face-to-face applications, for example a doctor with a patient, or a sales person with a customer. The cases have two inclined operating panels at right angles to each other which allow simultaneous input of data on one side, and readout on the other.

The new TEKO ‘OV-IP’ enclosures have been designed for small RF or infra-red remote control devices which are fitted on a key ring. These modern and highly tactile cases are manufactured using the latest dual shot moulding technique, combining grey ABS with black ‘soft-touch’ rubberised TPE. Each case consists of a single moulding which is folded over at the key ring end and secured by two self tapping screws, thus providing a high protec...

These pocket size 'OVO' enclosures from TEKO are designed for the latest hand-held electronics, and feature advanced ergonomics for comfortable handling and operation of the controls during use. Applications will include RF and infra-red remote control units as well as controller devices connected via a cable.

The ‘conFORM’ enclosures, from ROLEC, are specially designed to protect highly sensitive electronic components against radio frequency interference. The enclosures have been EMC performance tested by Hanover University in Germany.

OKW has extended the ‘DIATEC’ range of wall mounting enclosures with two new models moulded in lava (dark grey) ABS. The new models are particularly suitable for wall or machine mounted applications for example machine controllers, door entry systems, time loggers, detections systems, communications devices, and medical equipment.

With the ‘aluCASE’ range, ROLEC seems to have answered many of the criticisms of standard off-the-shelf die-cast enclosures. These high performance IP 67 enclosures have been developed using modern, so called intelligent design principles.

OKW have added two new models to the unique ‘SENSO-CASE’ series of hand controller enclosures. These new models have an integrated push-button switch, in the natural trigger position on the underside of the case, which ensures logical fatigue free operation of the unit for activation and logging functions. Typical applications will include measuring and control units, machine and robot controllers, stock and sales logging equipment, medical a...

TEKO has extended its popular TEKBOX range of enclosures with new sloping front keypad versions which have been designed for desktop or hand-held electronics. Typical applications will include data entry keypad devices for point-of-sale, medical, computer, and test and measurement equipment.

The ROLEC ‘technoBOX’ range features an attractive modern design including a bevelled lid, clean lines and easy assembly, all at very competitive prices which start at just £6.

METCASE has extended the ‘MINIMET’ range of aluminium instrument cases. These compact enclosures have been designed for desktop and portable electronics. Typical applications will include test and measurement systems, medical and wellness devices, laboratory equipment, switch boxes, peripherals and interfaces etc.

OKW has extended its ‘RAILTEC’ range with a line of DIN-Rail PCB interface supports. These have been designed to allow open PCB assemblies to be mounted in a control cabinet using the standard DIN-Rail system. Typical applications will include factory automation, building and safety systems, heating and air conditioning units, automatic timers, sensors, relays and signal distribution.

TEKO has introduced the ‘POCKET 11’ series keyfob style enclosures. These versatile housings have been designed for remote control devices. Typical applications will include RF and infra-red remote control systems, personal security devices and door access equipment.

OKW has introduced the ‘COMTEC’ range of sloping front keypad enclosures. These modern enclosures feature an attractive ‘softline’ design with an ergonomically inclined (10º) operating area, which guarantees comfortable operation of the controls.

METCASE has launched its ‘INSTRUMET’ 19in case range. These stylish, versatile and light weight enclosures conform to the DIN and IEC standards for full and half width 19in equipment, and will accept standard 3U subracks and chassis. Typical applications will include test and measurement devices, communications equipment, medical equipment, laboratory systems and much more.

The TEKO ‘Smartbox’ range offers electronics engineers a versatile and low cost housing solution. These universal enclosures are available with external mounting ears which allow fast mounting to walls, machines, furniture or any vertical or horizontal surface, without the need to open the case. Typical applications will include remote sensing and detection devices, RF equipment, switching units, security devices and connection nodes.

TEKO have extended the TEKAL range of extruded aluminium enclosures. These versatile housings have been designed for hand-held, desktop and wall mounted electronics. Typical applications will include mobile data recorders, test and measurement devices and control equipment.

ROLEC has published its comprehensive catalogue detailing its range of industrial enclosures which are designed for electrical and electronic applications. For the first time all the product sections have been combined into one easy to use handbook. This 236 page colour catalogue provides design and installation engineers with a great source of high performance enclosures with specifications from IP 54 to IP 69K, The ordering information, drawing...

Following customer demand, OKW have extended their innovative ‘SOFT-CASE’ enclosures with the new size ‘XL’ series. These new models have been designed for larger mobile electronics. Typical applications will include hand-held instrumentation, medical devices, mobile data logging and data capture equipment and much more.

ROLEC's advanced ‘aluDISPLAY’ enclosures have been designed for slim line displays and control panels. The enclosures can be used as portable units, wall mounted, or fixed to a suspension arm system. Typical applications will include machine controllers, medical equipment, information terminals, display systems and process control units. The ‘aluDISPLAY’ enclosures consist of a contoured case extrusion, two die-cast end panels, a screw-on...