Sitting between a PoL design and that of a complete non-isolated buck converter module, the OKLP-X/35-W12-C is the latest addition to Murata's OKLP range of “Power Block” products. The 35A Power Block follows the recently released 25A version, and is essentially a non-isolated buck converter without a PWM controller.

Designed specifically for use in industrial, automation and instrumentation applications, the MEF1 series of 1 Watt regulated DC/DC converters have been introduced by Murata Power Solutions. The single rail regulated output makes the converters ideal choice for power sensors, such as pressure transducers, hall effect sensors and mass airflow sensors.

Achieving a minimum conversion efficiency of 92% at 50% full load, the D1U86G AC/DC power supply from Murata is suitable for length-limited applications and mid-plane design architectures. The D1U86G series comprises two models, both providing a + 12VDC 460W output with either “back to front” or “front to back” direction of airflow.

Murata have today introduced a new series of 1200 Watt front end power supplies in a small 54mm width form factor. Measuring only 54.5 mm x 321.5 mm x 40 mm and fitting the industry standard 1U package format, the new D1U54P series power supplies feature a power density in excess of 28 Watts per cubic inch and industry leading efficiency of greater than 94%.

Murata vient de présenter le premier d'une série de modules de puissance qui offrira à l'ingénieur en réseaux électriques un concept alternatif de convertisseur DC-DC non isolé.Conçu par Murata Power Solutions en réponse à la demande croissante pour des densités de puissance toujours plus importantes, le produit se situe à mi-chemin entre un POL discret et un ense...

Murata have today introduced the new PAE series of high efficiency 100 Watt DC-DC converters specifically designed for use with multi-channel power amplifiers such as those found in the latest generation of microcell wireless transceivers. With a typical efficiency of 92.5%, the fully isolated PAE series keeps power dissipation on the module to a minimum, therefore reducing system temperatures and helping network operators save energy costs.

Murata release the MEU1 series of ultra miniature single isolated output 1 Watt DC-DC converters. Measuring just 8.30 x 6.10 x 7.55 mm, this new series achieves a 26% footprint reduction when compared to previously released products. The reduction in converter volume and footprint allows engineers to reduce the overall dimensions of their application, which is critical for space-constrained designs.

Murata Power Solutions présente sa série NCS12 de convertisseurs DC/DC 12 W en boîtier métallique compact. Adaptés à une plage de tensions d'entrée 4:1, ces convertisseurs isolés à simple et double sortie sont proposés avec tension d'entrée 9 – 36 V cc ou 18 – 75 V cc. Les modèles à sortie simple proposent les tensions de sortie nominales de 3,3 ...

Murata has released the DMR20-1-ACV “nanometer” self-powered four-digit bright LED voltmeter. This line powered AC voltmeter can measure the true RMS value of its input from 85 to 264 VAC to within 0.1 V resolution. Designed to be completely self-contained, the low cost two-wire voltmeter requires no additional components or connections apart from the AC voltage it is measuring.

Murata has today announced two new open frame, convection cooled AC-DC power supplies, the 40 Watt MVAD040 and the 65 Watt MVAD065. The new MVAD040 and MVAD065 power supplies are ideally suited for a wide range of high volume applications including medical and healthcare appliances, data storage and networking, and industrial factory automation systems.

The compact, metal-cased NCS12 series' 12 Watt DC-DC converters were launched by Murata Power Solutions today. These single and dual output isolated converters are available in 9 – 36 VDC or 18 – 75 VDC input voltage models, and are accommodated by a 4:1 wide input voltage range. Single output models cater for the popular nominal output voltages from 3.3 to 15 VDC. Duals are available with either +/- 5, +/- 12 or +/- 15 VDC outputs. ...

Murata introduce the compact DMR20-10-DCM “nanoMeter” self-powered auto-ranging DC voltmeter designed for mounting in an industry-standard “oiltight” 30 and 30.5 mm / 1.2 inch round panel cutout. Occupying minimal space, the round voltmeter has a 7.6mm / 0.3 inch four-digit LED display and is self-powered. Connection to the + 6 to + 75 VDC supply to be monitored is all that is required for full operation.

Murata Power Solutions announced today it has been accepted as a member of the EMerge Alliance. The EMerge Alliance is a global open industry association with the aim of developing standards for the rapid adoption of DC power distribution within commercial buildings.

Murata today announced the Murata Power Solutions MEJ1 series of isolated 1 Watt DC-DC converters. Encapsulated in a 7 pin SIP package, the MEJ1 series offers basic and supplementary isolation to the internationally recognized UL60950 standard.

Incorporating a 32-bit ARM7 processor, the 420 Watt regulated UDQ2204/001 model is the first in a series of DC-DC converters from Murata Power Solutions to include a PMBus compatible digital interface. The UDQ series is packaged in the industry standard quarter-brick format incorporating the Advanced Bus Converter pinout for PMBus communications to an isolated DC-DC converter.

Murata today announced the Murata Power Solutions MTE1 series of isolated 1 Watt single output DC-DC converters. Suitable for a broad range of industrial and automation applications, these highly efficient units, up to 88%, offer much better efficiency across the full load range than competitor models currently available, resulting in less waste heat to be dissipated.

Murata today announced the Murata Power Solutions 3000A and 3000B series of low profile power inductors for use in noise reduction circuits of high frequency and high current switching power supplies, DC-DC converters and voltage regulator modules.

Murata have today revealed the availability of the RBQ series of isolated 12Vout, 400 Watt DC-DC converters from Murata Power Solutions. The RBQ-12/33-D48 model provides what are believed to be the industry’s highest efficiencies of up to 96% from a standard DOSA-compliant quarter-brick package. The RBQ-12/33-D48 is designed to operate in most applications with convection cooling.

Murata Power Solutions have today announced the introduction of the PAQ series of 150 Watt isolated DC-DC converters. Packaged as an industry standard open-frame quarter brick module with through-hole mounting, the converter has a 2:1 input range of 36 – 75 VDC around a nominal 48 VDC input.

Murata today announced the MEJ2 series of fully encapsulated compact through-hole 2 Watt DC-DC converters. Providing a pin-compatible upgrade path from Murata’s NMJ, MEV1 and NMV series, the MEJ2 2W devices are available with either single or dual outputs covering the nominal voltages of 3.3, 5, 9, 12 or 15 VDC. Input voltage variants accommodate 3.3, 5, 12 or 15 VDC.