MSC now offers the 27D-3KV series of 2 Watt DC/DC converter modules from YDS. Key features of these DC/DC converter modules are 3000 VDC input to output isolation, continuous short circuit protection, low ripple and noise, remote on/off and an extended temperature range from -40°C to +85°C with natural convection cooling.

MSC presents its new ModSKD-RX62T Evaluation Kit. This new modular development kit, based on MSC’s proven ModSKD development system, enables a fast and affordable entry into the world of RX600 microcontrollers from Renesas Electronics.

MSC now offers eight new ultra low power 32-bit MCUs in the V850ES/Jx3-L series from Renesas Electronics. These devices are especially suited to mobile smart metering and medical applications with high memory demand.

MSC now offers eight new ultra low power 32-bit MCUs in the V850ES/Jx3-L series from Renesas Electronics. These devices are especially suited to mobile smart metering and medical applications with high memory demand.

MSC presents an innovative ARM-based module concept - that is especially suitable for cost-sensitive embedded applications - in Hall 9, Booth 463 at embedded word 2011. Due to their pin compatibility and the usability of various CPUs - the current range is from ARM9 derivatives clocked at 400 MHz up to 1 GHz Cortex-A8 cores - the new nanoRISC® modules offer a high degree of scalability. Furthermore, the modules, which measure only 50 mm x 70 mm,...

With the MSC Q7-NT2, MSC Vertriebs GmbH presents its first ARM processor based Qseven module. The compact module consumes only 5 W typical and is specified for an extended ambient temperature range from -40°C to +85°C. The excellent graphics performance of the embedded module allows playback of HD videos and is, among other applications, ideally suited for digital signage.

MSC presents its new Visualization Reference Design Kit (VisuRDK) in Hall 9, Booth 463 at embedded word 2011. The VisuRDK-RX62N-WQVGA Reference Design Kit is a cost-saving single-chip solution with which TFT displays up to a resolution of 480 x 272 pixels (WQVGA) can be directly controlled.

The compact MSC CXB-6S COM Express module family from MSC Vertriebs GmbH offers a leap forward in computing power, graphics and video performance. The CoM boards - in the basic form factor of 125 mm x 95 mm - are based on the second generation Intel® Core™ processors, manufactured in 32 nm technology. These new Intel® Core™ i5 and i7 CPUs with two or four cores have recently been announced for the consumer market (laptops) and at the same t...

MSC now offers the new PS7901D-1A optical-coupled MOSFET from Renesas Electronics. Key features of this device are an output capacitance of only 0.75 pF and a low leakage current of just 30 pA. The PS7901D-1A comes in an ultra-compact 4-pin flat-lead package measuring only 2.9 mm x 2.3 mm.

MSC now offers silicon MEMS-based OCXO, TCXO and VCXO products - specifically for telecommunications, networking, wireless and storage applications - from SiTime. The silicon-based timing solutions offer pin compatibility with existing quartz-based solutions, optimum space utilization, high reliability, low jitter and the best possible flexibility in terms of development, production and lead times.

MSC now offers the new family of high performance surface acoustic wave (SAW) IF filters from Vectron International. The new range of IF filters - covering all of the standard LTE bandwidths from 3.5 MHz to 75 MHz - is specifically optimized for transceivers and repeaters used in Long Term Evolution (LTE) applications.

MSC expands its existing clock generators product offering with the SiT9105 from SiTime. The SiT9105 is the first MEMS-based programmable clock generator that combines LVCMOS and differential outputs in a single package, thus reducing board area by up to 66%.

MSC now offers the 'Time Machine', a complete programming kit for SiTime’s MEMS-based silicon timing solutions. This MEMS oscillator programmer features fast programming support for various singled-ended-, differential-, spread spectrum- and VCXO MEMS oscillator samples.

MSC now offers the new NP75N04YUK N-channel power MOSFET from Renesas Electronics. Key features of this device are the capability to handle current flows up to 75 A and an on-resistance of only 3.3 mΩ. The NP75N04YUK comes in a compact HSON-8 package with external dimensions of 6 mm x 5.15 mm.

MSC now offers the new RJK60S5DPK high-voltage power MOSFET von Renesas Electronics. Key features of this device are an ultra-low on-resistance of 150 mΩ and a gate-drain charge capacitance (Qgd) of only 6 nC at 10 A maximum current (ID) and 10 VGSS voltage tolerance.

MSC now offers the new SiT8004 MEMS oscillator in the 125 MHz to 150 MHz frequency range from SiTime. Key features of this device are just 6.5 mA typical power consumption and 1.2 µA ultra low standby current.

MSC now offers the new 508 series of low G-sensitivity clocks and oscillators from Vectron International. Each product in the new line is provided in an extremely small 9 x 14 mm package.

MSC now offers the 68DW15 series of 15 Watt DC/DC converters from YDS. Key features of these converters are 4:1 input voltage ranges of 9-36 V and 18-75 V, single output voltages of 3.3 V, 5 V, 12 V or 15 V and dual output voltages of ±12 or ±15 V.

MSC now offers the new 95DW-R3 series 20 Watt DC/DC converters from YDS. Key features of these converters are 4:1 input voltage ranges of 9-36 V and 18-75 V, unipolar output voltages of 3.3 V, 5 V, 12 V or 15 V and bipolar voltages of 5 V, 12 V or 15 V.

MSC now offers the 92D series DC/DC converters from YDS. Key features of these converters are a nominal power of 100 W, input voltage ranges of 18 V to 36 V and 36 V to 75 V as well as output voltages of 3.3 V, 5 V, 12 V or 15 V.