MSC VERTRIEBS GMBH
- Industriestraße 16
D - 76297 Stutensee
Germany - +49 (0) 72 49 910 - 0
- http://www.msc-ge.com
- +49 (0) 72 49 79 - 93
MSC VERTRIEBS GMBH Articles
Cost-Efficient COM Express Module with 32 nm Celeron CPU
The high-end MSC CXB-6S COM Express module family from MSC Vertriebs GmbH based on the second generation Intel Core processors is going to be offered not only with i3, i5 and i7 CPUs with two or four cores but also with a cost-efficient Celeron® variant.
MSC - MEMS VCTCXOs with ±0.5 ppm stability
MSC now offers the new Encore-based SiT500x family of MEMS VCTCXO (Voltage Controlled Temperature Compensated Crystal Oscillator) from SiTime. The SiT500x family features an outstanding ±0.5 ppm and 500 femtoseconds of integrated RMS phase jitter in the range of 12 kHz to 20 MHz.
MD-023 – the cost-effective alternative to rubidium clocks
MSC now offers the MD-023 Extended Holdover Crystal Oscillator (EHXO) from Vectron International. The new MD-023, specifically designed for use in wireless base stations, enables cost savings of up to 50 percent compared with conventional, high-stability rubidium oscillators.
VT-803 - High stability TCXO in a small 5.0 mm x 3.2 mm footprint
MSC now offers the VT-803 Temperature Compensated Crystal Oscillator (TCXO) from Vectron International. The new VT-803, provided in a 5.0 mm x 3.2 mm x 1.5 mm ceramic package, features high stability of 100 ppb and an excellent close in phase noise.
DF59 Multifunctional Connector
Now available at MSC Vertriebs GmbH: the DF59 multifunctional connector of Hirose, which is applicable for wire to board power supply connections and board to board ‘bridge’ connections. In addition a shortening plug version is available. Only one type of receptacle is needed, irrespective of whether the cable plug or board mount plug is used, allowing a reduction in the number of components needed.
Voltage controlled SAW oscillator is ideally suited for high-quality test and measurement equipment and 100 Gigabit networks
MSC now offers the new VS-401 VCSO (Voltage Controlled Saw Oscillator) from Vectron International. A key feature of the VS-401 is an ultra-low 12 femtoseconds (fsec) root mean square (rms) jitter over the entire bandwidth from 12 kHz to 20 MHz.
32-bit SuperH MCU with 533 MHz clock frequency, Open VG graphics accelerator and Gigabit Ethernet controller
MSC now offers the new SH7734 32-bit SuperH™ microcontroller (MCU) from Renesas Electronics. The SH7734, with high-performance graphics and network functionalities, features an Open VG compliant graphics accelerator and a Gigabit Ethernet controller.
32-bit SuperH MCU with 533 MHz clock frequency, Open VG graphics accelerator and Gigabit Ethernet controller
MSC now offers the new SH7734 32-bit SuperH microcontroller (MCU) from Renesas Electronics. The SH7734, with high-performance graphics and network functionalities, features an Open VG compliant graphics accelerator and a Gigabit Ethernet controller.
MSC joins Intel’s Embedded Building Blocks initiative
MSC Vertriebs GmbH has joined the new Embedded Building Blocks initiative launched by Intel®. The objective of this initiative is to offer system integrators and resellers the opportunity to easily enter the embedded computing market using existing standardized modules with baseboard kits and suitable housings. Compact and robust industrial computer systems for various requirements, such as in industrial automation, can be constructed with the p...
MEMS-based programmable oscillators with sensational 600 fs of phase jitter and continuous frequency stability of ±10 ppm
MSC now offers the new Encore-based SiT820X family of MEMS-based programmable oscillators from SiTime. The SiT820X family features an unprecedented 600 femtoseconds (fs) of phase jitter in the critical range of 12 kHz to 20 MHz for SONET-applications and a continuous frequency stability of ±10 ppm from -40°C to +85°C.
Optocoupler with high speed switching of 200 ns maximum and integrated IGBT protection circuit
MSC now offers the new PS9402 optocoupler from Renesas Electronics. The PS9402 comprises a gallium-aluminum-arsenide (GaAlAs) LED, a photo detector IC and an IGBT protection circuit. It enables particularly space and cost-saving designs of inverters for motor control, solar power generation systems, etc.
Real time clock oscillator product portfolio with an extremely wide continuous operating temperature range from -55°C to 250°C
MSC now offers the High Temperature Real Time Clock (HT RTC) product portfolio from Vectron. The new low power HT RTC oscillators were specifically designed for use in extreme environment applications. Compared to a traditional RTC solution with 32.768 KHz tuning fork resonator design, the HT RTC solution provides unsurpassed reliability with long lifetime and a continuous operating temperature range from -55°C to 250°C.
SiTime revolutionizes the VCXO market with its MEMS-based SiT380X family
Jitters of significantly less than 1ps, a pull range of up to ±1600 PPM and a linearity of less than 1% are the key features distinguishing the new MEMS-based voltage-controlled oscillators (VCMOs) of the SiT380X family from SiTime. These devices are available from MSC for different applications in telecom, networking and embedded applications.
New Embedded Computer Modules and Boards Brochure
MSC Vertriebs GmbH describes its complete product range of innovative board level products in the updated „Embedded Computer Technology” edition 2011 color catalog. The new 52 pages brochure contains the key technical parameters of all offered COM Express™, Qseven™, ETX®, EXM32 platforms, industrial mainboards and starter kits.
Crystal oscillator for high shock and vibration applications withstands operating temperatures from -55°C to +230°C
MSC now offers the new PX-570 crystal oscillator from Vectron International. The PX-570 features an ultra high and wide continuous operating temperature range from -55°C to +230°C.
RX210 Group of 32-bit MCUs with low power consumption and extreme wide operating voltage range sets new standards
MSC now offers the first new RX210 Group 32-bit MCUs from Renesas Electronics. Key features of these devices are a low current consumption of just 0.21 mA/DMIPS at 50 MHz clock frequency and only 1.3 µA in deep standby mode with the real-time clock (RTC) running as well as a wide operating voltage range from 1.62 V to 5.5 V.
First complete MEMS-based oscillator family for Tablet PC and E-Book Reader applications
The first complete portfolio of MEMS oscillators for Tablet PC and E-Book Reader designs is now available from MSC. These solutions, all of which are based on SiTime’s SiT8003 Low Power MEMS Oscillator platform, are approximately 30% thinner than quartz and offer up to 10 times better robustness to shock and vibration.
Quad-band GSM/GPRS Class 12 module with only 1.1 mA current consumption and 85.6 kbps uplink speed
MSC now offers the M-10 Quad-band GSM/GPRS module from Quectel. The M-10 is a complete GSM/GPRS 850/900/1800/1900 MHz solution and is ideally suited for machine-to-machine (M2M) applications which require a robust construction and low power consumption.
New R8C/LAxA MCUs simplify the development of low-cost battery-powered applications with LCD display
MSC now offers the new R8C/LA3A and R8C/LA5A MCU product groups from Renesas Electronics. The products are ideally suitable for cost-sensitive battery-powered metering applications with LCD display. The R8C/LA3A and R8C/LA5A groups are available in low-profile quad flat packages (LQFP) with 32 pins or 52 pins.
GPRS/UMTS- and GPS-module for M2M business and automotive market
MSC Vertriebs GmbH located and Quectel Wireless Solutions Ltd. have signed a Pan-European distribution contract.