The SAM D20 Xplained Pro evaluation kit is a hardware platform to evaluate the ATSAMD20J18A microcontroller. The SAM D20 Xplained Pro evaluation kit is suitable for evaluation and prototyping with the SAM D20 Cortex-M0+ processor-based microcontrollers that are suitable for a wide range of home automation, consumer, metering, and industrial applications.

In microcontroller (MCU) based system design, software is often the bottleneck for both time to market and system performance. By offloading many software tasks to hardware, Microchip Technology’s next generation PIC18-Q43 family helps developers bring higher performing solutions to market faster.

In this demo, an accelerator pedal angle is measured by a dual linear position sensor and the valve of a throttle body is controlled by sensing the angle using a rotary inductive sensor. 

Battery Management Systems (BMS) are the 'brain' of any battery pack. It is responsible for measuring cell voltages, ensuring balanced charge cycles, state identification, and controlling crucial safety systems.

Ethernet is becoming more common in spacecraft to enable hardwired communication speed, support higher data rates, and facilitate interoperability between satellites and other spacecraft. As Ethernet in space applications continues to expand, Microchip Technology has announced a space-qualified Ethernet transceiver.

The trend towards compute-intensive gateways and edge devices is driving the integration of traditional deterministic control applications with additional embedded processing capabilities needed for smart and secure connected systems. In response, Microchip Technology has announced the Early Access Programme (EAP) for the PolarFire System-on-Chip (SoC) FPGA.

The MCP3564 ADC Evaluation Board for PIC32 MCUs (ADM00583) provides the ability to evaluate the performance of the MCP3564. Providing a development platform for 32-bit PIC device-based applications, using existing 100-pin PIC microcontroller Plug-in Module (PIM) systems that are compatible with the Explorer 16 and other high-pin count PIC32 device-based demo boards.

Microchip has announced the RT PolarFire FPGA that is optimised to meet the most demanding requirements in spacecraft payload systems’ high-speed data paths with the lowest possible power consumption and heat generation. Microchip has extended its RT FPGA offering to bring these capabilities to emerging high-performance space applications.

As reliance on precise frequency and timing increases due to the Global Navigation Satellite System (GNUS) enabling 5G communication networks, data centres and other mission critical infrastructure, smaller size and high-performance atomic clock technology has become essential to support both military and commercial applications.

This setup demonstrates how a network of microphones, speakers and accelerometers (acceleration sensors) realise a Road Noise Cancellation use case in vehicles. 

Functional safety certifications are required in many industries, but it is often a time-consuming and expensive process. Certifications can also require extensive justification for using specific development tools, unless the tool is already certified for compliance by functional safety experts such as TÜV SÜD, a Munich-based certification organisation.

The Microchip MPLAB PICkit 4 In-Circuit Debugger allows fast and easy debugging and programming of PIC and dsPIC flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE). The MPLAB PICkit 4 programs faster than its predecessor with a powerful 32-bit 300MHz SAME70 MCU and comes ready to support PIC and dsPICMCU devices.

  Microchip has announced a new family of Serial Peripheral Interface (SPI) EERAM memory products that offers system designers up to 25% cost savings over the current serial Non-Volatile RAM (NVRAM) alternatives. The family introduces four reliable SPI densities to Microchip’s EERAM portfolio, ranging from 64Kb up to 1Mb.

Data centre administrators and IT managers want the ability to securely manage and trouble-shoot platforms and devices remotely, which requires that additional software, hardware and firmware be interfaced with storage adapters and other server components.

As the number and types of connected devices proliferates, market fragmentation and security vulnerabilities in the Internet of Things (IoT) have created significant challenges for developers. Hardware-based security is the only way to protect secret keys from physical attacks and remote extraction, but extensive security expertise, development time and costs are required to configure and provision each device.

This is an introduction video to a video series in which Microchip implement capacitive touch on a PIC18F47Q10 Curiosity Nano.

Microchip enables both pre-standard and IEEE-compliant Powered Devices (PDs) to receive up to 90W of power without changing Power over Ethernet (PoE) switches or cabling. This development eases the transition to using IEEE 802.3bt-2018-compliant PoE injectors and midspans for users, and Power Sourcing Equipment (PSE) chipsets for system developers.

The SAM R30M Xplained Pro is a hardware platform designed to evaluate the SAMR30M18A module. This kit is supported by the Atmel Studio, an integrated development platform, which provides predefined application examples. This kit provides easy access to various features of the SAMR30M18A module and offers additional peripherals to extend the features of the board and ease the development of custom designs.

Microchip has announced the Trust platform of hardware and software elements that will simplify embedded system design for companies of all sizes. The expansion of the IoT and increased connectivity brings security concerns and highlights vulnerabilities.

Microchip announces two new solutions that simplify USB Type-C PD designs to remove the traditional complexity and high costs associated with implementing USB Type-C in a range of applications. As one of the industry’s first USB-IF-certified USB 3.1 SmartHub devices with integrated support for Power Delivery (TID1212), the USB705x family enables fast device charging and introduces unique PD implementations called HostFlexing and PDBala...