Laird Technologies have today released its WL Series Liquid to Air Heat Exchanger Systems product line. The WL Series products are self-contained units designed to remove a large amount of heat from densely packed electronic environments that are not conducive to conventional heat sink fans.

Laird Technologies today announced it has been named as a CW 100 company in M2M and connected devices by Connected World magazine. As determined by the editors of Connected World and its editorial board, the list is compiled from a selection of hundreds of firms, both private and publicly traded.

Laird Technologies today announced it will attend the SAE Convergence Conference and Exhibition. The event will take place at the Cobo Center in Detroit, Michigan, October 16-17, 2012. Laird Technologies will exhibit at booth #919.

Laird Technologies today announced it will be attending MINExpo International 2012. The event will be held at the Las Vegas Convention Center in Las Vegas, Nevada, September 24-26, 2012.

Laird has today revealed that it will be attending the APCO International 78th Annual Conference & Expo. The event will take place at the Minneapolis Convention Center in Minneapolis, Minnesota, August 19-22, 2012. Laird Technologies will exhibit at booth # 1500.

Laird has today revealed that it will be attending the 2012 Shenzhen International Internet of Things Technologies and Application Exhibition. The exhibition will take place at the Shenzhen Convention and Exhibition Center in Shenzhen, China, August 15-17, 2012. Laird Technologies can be found at booth #A70-A71.

The eTEC Series of TEMs enable high powered optoelectronics to maintain peak performance by stabilizing the temperature of the device during operation. The modules are assembled using thin film technology that enables the TEMs to have ten times the heat pumping density per unit area than conventional bulk thermoelectric technology. The ceramic substrates are gold metallized to allow the product to be embedded into densely packed optoelectronics.

Laird Technologies today announced it will be attending the 2012 IEEE International Symposium on Electromagnetic Capability. The event will take place at the David L. Lawrence Convention Center in Pittsburgh, Pennsylvania, August 5-10, 2012. Laird Technologies will be located at booth #822.

Laird Technologies, Inc today announced the release of its new ReMovl board-level shielding product enhancement. ReMovl incorporates the ReCovr attachment mechanism applied to the pickup bridge of the BLS frame to allow for easy, tool-less detachment of the bridge after the frame is soldered to the printed circuit board.

Laird Technologies, Inc. today announced the appointment of David Lockwood OBE as its Chief Executive Officer. David brings considerable experience from a variety of market and technology sectors relevant to Laird Technologies’ business, particularly in wireless communication.

Laird Technologies, Inc. today announced it will be attending four events during the first full week of May (6-12). The list of events includes the following: Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Conference & Exhibition 2012, Association for Iron & Steel Technology (AISTech) 2012, Electronics Distribution Show (EDS) 2012 and International CTIA Wireless 2012

Laird Technologies, Inc., today announced it will be attending the ESC Silicon Valley 2012 trade show. The trade show will be held at the McEnery Convention Center in San Jose, California, March 26-29, 2012. Laird Technologies can be found at booth #2116.

Microwave asorbers consist of materials that contain coatings whose electrical and/or magnetic properties have been altered in order to allow for the absorbtion of microwave energy at discrete or broadband frequencies. These absorbers have traditionally been used for EMI reduction, antenna pattern shaping, and radar cross section (RCS) reduction.

Laird Technologies, Inc. today expanded its in-building wireless product line with the release of the new CMS69273 LTE ceiling mount broadband omnidirectional antenna. For In-Building Wireless (IBW) solution providers, the CMS69273 offers the latest in next generation 4G solutions. The antenna provides indoor cellular coverage for GSM, DCS, UMTS and LTE/WiMAX standards in the 698 to 960 MHz, 1575 MHz and 1710 to 2700 MHz frequency ranges.

Laird Technologies, Inc. today announced its acquisition of Microwave Materials Group, the holding company of Emerson & Cuming Microwave Products. For the year ended 31 December 2011, Emerson & Cuming’s revenues were €16.3. Revenues in 2011 increased over the previous year by 20%.

Laird Technologies, Inc. today announced the release of the first-to-market CMD69273 LTE MIMO 2-port omnidirectional celling mount antenna solution for the In-Building Wireless (IBW) industry. As the latest innovation in successful wireless deployment, the CMD69273 offers a complete cellular solution for 3G and 4G data communications. Optimized for indoor requirements, the antenna increases the throughput/capacity of cellular, UMTS and LTE/WiMAX ...

Microwave absorbers consist of materials that contain coatings whose electrical and/or magnetic properties have been altered in order to allow for the absorption of microwave energy at discrete or broadband frequencies. These absorbers have traditionally been used for EMI reduction, antenna pattern shaping, and radar cross section reduction.

Laird Technologies, Inc. have announced the release of its new APG BT W400 wireless access point gateway. The new gateway is ideal for M2M wireless communications and for connecting Bluetooth enabled devices in a Personal Area Network to IP network via Ethernet or WLAN interface.

Multi-hop mesh protocols, such as Zigbee, are getting a lot of press for their ability to link together low data-rate Machine-to-Machine (M2M) applications. Zigbee, in particular, is targeting itself as the standard bearer for wireless, low-power meshing protocols. Many of the features of a Zigbee solution touch on the requirements for expanding wireless M2M markets. Low data rate, low power, enhanced range through the mesh and automated on-deman...

Laird Technologies, Inc. has announced the release of its new High Power LT1110 900 MHz wireless module. The new High Power LT1110 900 MHz wireless module sets yet another standard for industrial RF communication. Based on proprietary FlexRF technology, this module offers more than forty times the output power of the current low power LT1110.