Enhancements for its FieldFox handheld RF and microwave analysers have been announced by Keysight Technologies. The analysers now connect to Keysight’s 89600 VSA software. The FieldFox to 89600 VSA link provides a powerful combination of hardware and software for design and troubleshooting of devices using signal formats.

A wide range of design, test and characterisation solutions will be showcased by Keysight Technologies at European Microwave Week. This is Keysight’s fourteenth year as a platinum sponsor and the company is now co-sponsoring the defence and security forum. Keysight’s technical experts will be on hand to discuss and demonstrate a number of solutions.  

A solution to characterise magnetic tunnel junction (MTJ) for spin transfer torque magnetoresistive random access memory (STT-MRAM) has been announced by Keysight Technologies. It overcomes the challenges of conventional rack and stack base test environments. The NX5730A High-Throughput 1ns Pulsed IV Memory is a dedicated solution for researchers and engineers struggling with the characterisation of MTJ devices on silicon wafers.

The launch of a cloud-based reporting service available for data measured with Nemo measurement solutions has been announced by Keysight Technologies. The reporting service provides an automated reporting workflow for acceptance, verification, benchmarking, in-building and drive test measurements. It shortens the turnaround time from data collection to reports and provides a single point of control.

A collaboration between Keysight Technologies and ThinkRF, a leader in software-defined spectrum analysis enables deep and consistent signal quality measurements across many different deployments and applications. The resulting solution, based on Keysight’s 89600 VSA software sets a new standard for open, flexible and cost-effective spectrum monitoring and analysis.

Keysight Technologies has made enhancements to its M8040A high performance bit error rate tester (BERT) solution for testing PAM-4 and NRZ devices that operate up to 64GBaud. Engineers in validation labs and R&D who characterise receivers on the physical layer for emerging 400G data centre interconnects will benefit from simplified test setups and repeatable and accurate results.

When should you use a passive probe or an active probe? Join Ally as she unveils this oscilloscope probing mystery by walking you through the basics of the two main types of oscilloscope probes: passive probes and active probes.

This video from Keysight Technologies will discuss the biggest power integrity challenges in IoT testing and how to solve them.

A solution that supports simultaneous cellular and WiFi testing has been developed by Keysight Technologies. The T5510S Cellular + WiFi emulation system is a powerful, flexible platform enabled by the combination of Keysight's UXM network emulator and the Ixia Solutions Group's Wave Test System.

The E36300 Series triple-output programmable DC power supplies from Keysight Technologies boast a large colour display, intuitive user interface and modern device connections via LAN (LXI, USB and optional GPIB).

A wide range of design and test solutions for components and systems used in 5G communications, internet of things (IoT), and aerospace and defence applications that solve the toughest engineering challenges will be showcased by Keysight Technologies at the IEEE International Microwave Symposium in Hawaii. (June 4–9).

A broadband millimeter-wave network analyser solution that delivers system-level accuracy up to 120GHz has been announced by Keysight Technologies. The N5290/91A solutions produce metrology-grade results that enable leading-edge developers to confidently characterise their millimeter-wave designs.

The Keysight Test Platform 195 is said to be the first and only test platform that includes RF NB-IoT and CAT-M validated test cases together in the Global Certification Forum (GCF). During the most recent Conformance and Interoperability Agreement Group meeting, CAG#50, held in London, the Keysight T4010S conformance test system reached first position in the sum of validated GCF RF NB-IoT test cases and bands as well as first position in RF over...

Keysight Technologies and Spreadtrum Communications have announced the Spreadtrum-Keysight Innovation Centre, located in Shanghai. The Centre strengthens the strategic partnership between the two companies, first announced in 2016. It will provide mobile module design and test services for designers aiming to move forward the next generation of mobile communications innovations.

A new MIPI D-PHY and C-PHY test solution to help accelerate the development of next-generation mobile and IoT devices has been released by Keysight Technologies. The test solution supports the MIPI Alliance’s D-PHY v2.0/v2.1 specification and C-PHY v1.0/v1.1 specification and conformance test suite.

A cellular-IoT test solution from Keysight Technologiess was selected by China Telecom to help accelerate its Narrow-Band IoT (NB-IoT) chipset and module certification progress. Based on the E7515A UXM wireless test set, Keysight is the only all-in-one test platform vendor to support China Telecom’s NB-IoT RF conformance test and power consumption verification.

The 2-Minute Guru is dedicated to teaching the basics of electrical engineering concepts and equipment.

A plan to help accelerate the deployment of Internet of Things (IoT) technologies has been unveiled by Keysight Technologies. IoT capabilities is expected to help connect billions of devices with applications—such as smart homes, connected cars, healthcare and smart cities; as well as industrial applications, including energy systems, agriculture and transportation.

A new low-cost oscilloscope series, with a starting price below €450 Euros has been unveiled by Keysight Technologies. The InfiniiVision 1000 X-series of oscilloscopes boasts 50 to 100MHz models that feature unique, Keysight-custom technology. The oscilloscopes deliver professional-level functionality with excellent software analysis and 6-in-1 instrument integration.  

Ten new PXIe instruments, including a new arbitrary waveform generator that includes three highly synchronised channels for precise tuning of IQ waveforms and envelope tracking, as well as the industry’s first full-featured PXI oscilloscope have been introduced by Keysight Technologies. The AWG and oscilloscopes provide up to 1GHz bandwidth to support complex baseband IQ signal generation and analysis for evaluating emerging 5G and aerospac...