Designed as a replacement for two circular connectors, the Cm2 series low voltage connectors from ITT Cannon provide maximum power in a minimum size package featuring 50% less weight than conventional circular connectors. Also 50% shorter than comparable circular connectors and benefiting from a low profile design, the devices are ideal for small servo motors requiring low power (up to 3A) in applications where space is at a premium such as indus...

Within the CmX range of servo motor connectors from ITT Cannon new Cm5 connectors feature the highest maximum current of 40A for motor flanges of up to 150x150mm. Designed as a replacement for two circular connectors, Cm5 series connectors benefit from a minimum size package and can be installed simply and at low cost. Compared to conventional circular connectors, the devices feature 50% less weight and require only half the length to house the s...

Now available from ITT Interconnect Solutions is the Micro-K range of high reliability, rugged, lightweight micro-miniatures circular connectors developed using the proven twist pin micro-miniature contact technology, With factory installed contact termination to up to 24 AWG wire, Micro-K connectors can be configured to meet customer needs in lightweight, compact designs.

ITT Cannon has introduced its range of small ‘two-in-one’ servo motor connectors reducing the connector footprint on the servomotor by half and meeting the latest requirements for cost reduction, miniaturization and maximum performance. Designed as a replacement for two circular connectors, the innovative design of CmX range servo motor connectors only requires half the length, one third the height and half the weight to house the same compon...

New from ITT Electronic Components the company’s range of nano-miniature connectors takes the proven twist pin micro-miniature contact technology one stage further, with the reduced contact pitch of 0.635mm providing significant space and weight saving when compared to conventional micro-miniature connectors.

A new addition to the standard range of Cm3 connectors has recently been launched by ITT Cannon. Designed for small servo motors in applications such as industrial motion control, robotics, factory automation and material handling, new low profile Cm3 2x power connectors use one standard power connector to feed the motor (three power contacts plus one ground contact) plus an additional power connector (featuring four power contacts) for the two-w...

Now available from ITT is the company’s Premier Technology brochure with technical Pull Sheet and White Papers for Pogo-Pin, Break-Away, Chip-on-Flex, Stacking, Quadrax and PHD Fibre Optic interconnection products. An accompanying CD-ROM with animation files enables a visual understanding of these technologies.

Now available from ITT Electronic Components is the company’s latest Rack and Panel connector catalogue. This ‘engineered for reading’ catalogue has been produced in a format that will allow the end user to obtain information readily on whatever aspect of the wide R&P range is needed to hand.

Designed as a replacement for two circular connectors, new Cm2 series high voltage connectors from ITT Cannon provide maximum power in a minimum size package and can be installed simply and at low cost. Compared to conventional circular connectors, new Cm2 series high voltage connectors feature 50% less weight and require only half the length to house the same components. The low profile design makes the devices ideal for small servo motors requi...

ITT Electronic Components, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has tested its Chip on Flex (CoF) filter connector technology to 1,000 cycles of thermal shock from -55°C to +125°C per MIL-STD-1344. Compared to the ceramic planar array block capacitor used in conventional filter connectors, the Cannon CoF connector utilizes a state-of-the-art flexible circuit where individual chip capacit...

ITT Electronic Components has developed a robust Micro-D connector with exceptional attenuation. Designated the TMDMP filter, the connector utilizes a unique internal filter design, providing the density needed to accommodate the ferrite tubes necessary for Pi filtering in military and aerospace applications.

A new connector website (www.ittcannon.com) has been launched by ITT to provide designers and customers with comprehensive information and design know-how. The completely redesigned site focuses on the company’s industry-leading brands – Cannon, VEAM, and BIW.

A rugged connector for entertainment lighting applications, the VEAM VSC Series from ITT is a threaded coupling, 19-pin, cylindrical connector. Emphasizing quality and durability, the connectors are sealed to IP 67 when mated, have a black, hard anodized, non-conductive finish for scratch and wear resistance, and feature a heavy-duty, ribbed coupling nut to provide easy mating and un-mating.

ITT’s VEAM Snaplock single pole power connectors will be highlighted on Farnell’s main website before it enters the main catalogue in 2008. Snaplock family connectors take up to 250 Amps and are 30% smaller than VEAM’s Powerlock connectors which are rated at up to 660A. Both families have a similar connection band, giving minimal power loss over 500 mating cycles.

ITT Electronic Components has announced Farnell as the first pan-European stockist for its Cannon Universal Contacts and Mini RF connectors. An independent range of SMT contacts, the new series of Universal Contacts provides an electrical connection between a device and a PCB. Manufactured as a single piece stamped product, incorporating pre-load and anti-lift features, new Universal Contacts have been designed to replace traditional interfaces w...

Launching in Europe at the DSEI Exhibition, ITT’s new Cannon Chip on Flex (CoF) filter technology virtually eliminates all stress from thermal shock and vibration while providing superior protection to sensitive electronics in a new lighter weight package. In MIL-DTL-38999 configurations, the CoF connectors have passed MIL-DTL-38999 Series III testing for thermal shock, random vibration, humidity and high altitude. The filter connectors are ide...

The new series of Universal Contacts, recently released by ITT Electronic Components, is an independent range of SMT contacts, providing an electrical connection between a device and a PCB. Manufactured as a single piece stamped product, incorporating pre-load and anti-lift features, new Universal Contacts have been designed to replace traditional interfaces where the contact is custom designed into the component.

ITT Electronic Components has developed a new interconnect system that eliminates up to five different proprietary power and signal cable connectors. The stacking power interconnect is a compact, cost-effective, mechanically and environmentally robust, as well as highly functional solution for electrically powered equipment requiring several wires to be connected to provide power and control signals for various functions.

Cannon Express Card 26 pin edge card connectors and cover sets meet the PCMCIA industry’s demands for 34mm and 54mm wide modules. Stainless steel cover sets are quick and easy to assemble, and can either be snapped together or ultrasonically welded. With a universal slot design with module formats measuring 5mm deep by just 75mm long, the connectors and cover sets enable both compact ExpressCard/34 and /54 cards to fit in the same aperture, sav...

ITT Electronic Components now offers customers working in demanding arenas the capability to deliver mixed signal package cable assemblies that save space, reduce weight and ensure complete EMI shielding effectiveness. Digital, power, high voltage and RF signals can all be packages in one micro interconnect assembly, and harnesses can feature multi-cable configurations with different break out schemes.