Intersil Corporation today introduced the industry’s fastest, lowest power single and dual channel 14-bit analog-to-digital converters with JESD204B serial outputs. These serial output ADCs provide single channel sampling rates up to 500 Megasamples/second and dual channel rates up to 250 Megasamples/second.

Intersil Corporation today expanded its family of precision amplifiers, introducing a set of 40V low power, high ESD products that provide excellent DC accuracy and noise performance. These new quad amplifiers are ideally suited for 12-bit to 24-bit process control, instrumentation and data acquisition applications.

Intersil Corporation today introduced the ISL3261x series of RS-485/RS-422 transmitters and receivers designed to meet the strict power budgets of battery and remote sensing applications. Operating from an industry-low 1.8V supply voltage and consuming less than 150uW, this new family is the optimal solution for designers who need to increase battery life and/or reduce the size of their power supply.

Intersil Corporation today introduced its new high performance, cost efficient D2Audio DAE-3HT 12-channel digital sound processor and amplifier controller, providing consumers with the premium sound quality experience they value most in their audio systems. Intersil D2Audio will be demonstrating its Digital Audio Engine sound processor and amplifier technologies during the International CES 2012.

The ISL78228 is a high efficiency, dual synchronous step-down DC/DC regulator that can deliver up to 800mA continuous output current per channel. The supply voltage range of 2.75V to 5.5V allows for the use of a 3.3V or 5V input. The current mode control architecture enables very low duty cycle operation at high frequency with fast transient response and excellent loop stability. The ISL78228 operates above the AM radio band as well as the 2.25MH...

Intersil Corporation has announced the appointment of Masayuki Wajima to the position of Vice President, Japan Sales. As a 26-year veteran of sales and management for technology companies, Mr. Wajima will be responsible for driving all aspects of Intersil’s success in Japan, including strengthening key customer relationships, rapidly growing revenues, increasing market penetration and expanding Intersil’s brand recognition.

Intersil Corporation has developed a new series of single, dual and quad digitally controlled potentiometers (DCPs) featuring the industry’s lowest supply voltages, power consumption and noise. The ISL233x5 and ISL234x5 provide the most flexible and reliable solution wherever a voltage or resistor setting is needed. Supply current is as low as 2.8uA at 5V, which is 40% to 50% lower than most competitive devices. Analog supply voltage can range...

Intersil Corporation has introduced its newest 10A integrated FET synchronous buck regulator featuring excellent efficiency and power density. The ISL95210 provides a very dense DC/DC converter solution with up to 45% total area reduction over alternative solutions. The device is a highly efficient, single-output buck regulator that requires only four external components. Intersil’s patented R4 control architecture provides exceptional transien...

Intersil Corporation has introduces the TW2960 4-channel 960H video decoder. The TW2960 is an enhanced next generation 4-channel video decoder that supports the new 960H technology. This patent pending technology allows analog video definition up to 960 lines, a significant upgrade from the traditional video definition of 760 lines. With this new “analog HD” solution, next-generation DVR platforms can create higher resolution video without c...

Intersil Corporation has released a new 2.5A step-down regulator that automatically boosts the input voltage to maintain regulation.

Intersil Corporation today introduced a space-saving, AEC-Q100-qualified dual synchronous step-down DC/DC regulator featuring a 2.25MHz switching frequency to minimize solution size. The ISL78228 dual step-down DC/DC regulator provides two independent 800mA outputs. Its 3mm x 3mm package and 2.25MHz switching frequency enables very small power solutions for a variety of space-constrained automotive and industrial applications. A 2.75V to 5.5V inp...

Intersil Corporation today introduced an automotive qualified ambient light sensor that can measure incident light levels down to 0.01 lux with near human eye spectral response.

Intersil Corporation has introduced the ISL55211, a low noise, wideband differential amplifier that requires only a single 3.3V power supply and consumes only 35mA quiescent current (155mW). The ISL55211 is an ultra-low distortion, high-speed differential amplifier that can drive high performance ADCs, such as the recently introduced 14-bit ISLA214P50, with minimal degradation to the ADC’s baseline performance. It provides three fixed gain ...

Intersil Corporation has expanded its family of radiation hardened single supply op amps with the introduction of the ISL70218SRH. This dual precision rail-to-rail output amplifier consumes half the power of competing devices, and provides superior noise performance, input offset and input bias current specifications.

Intersil Corporation today introduced the HIP4086A, a low noise, 80V, 0.5A three-phase bridge driver IC. The HIP4086A features low EMI along with the industry’s fastest rise and fall times, which help reduce switching losses and simplify development of flexible bridge-based PWM motor control designs.

The newest precision voltage reference from Intersil Corporation features low noise, low temperature drift and meets the low power requirements of high end and portable instrumentation systems. The ISL21090 is a wide input range, low noise precision bandgap voltage reference that provides half the noise of alternative solution with only half the power consumption.

Intersil Corporation introduced the ZL9117M, the latest member of Intersil’s expanding power module family. The ZL9117M is a fully-encapsulated digital power module capable of delivering 17A output current. The ZL9117M is configured using the industry’s easiest-to-use, point-and-click PowerNavigator GUI. Built-in auto-compensation algorithms also optimize transient response over varying load conditions. The industry standard PMBus interface ...

Intersil Corporation has expanded its portfolio of industry leading multi-phase DC/DC controllers by introducing the ISL95835 and ISL95837. Both controllers provide a complete low cost solution for CPU and GPU core power while delivering best-in-class transient response and efficiency. Each complies with Intel’s IMVP-7/VR12™ specification for smart voltage regulation to reduce power dissipation in the second-generation lntel Core-i5/i7 proce...

Intersil Corporation expanded its growing family of high speed analog-to-digital converters with a new series of devices that provide industry leading signal-to-noise ratios while consuming little power. The new devices offer excellent high input frequency performance, enabling simplified system architectures that improve manufacturability while reducing cost over traditional baseband architectures.

Intersil Corporation has introduced the ISL89367, the industry’s first dual channel 6A MOSFET driver capable of driving two outputs each with 6A of peak drive current. This unique part provides designers with an integrated solution for high speed driving of large, high current MOSFETs. The device is ideally suited for applications such as switching power supplies, motor drivers and Class-D amplifiers