Intersil launch the ISL75052SEH, a radiation hardened, single output LDO specified for an output current of up to 1.5A. Designed for aerospace and satellite power applications, the ISL75052 is the industry’s only SMD-approved LDO that is single event transient immune. It is high/low dose rate immune via wafer-by-wafer acceptance testing up to 100krad and 50krad, respectively.

Operation amplifiers are among the most widely used electronic devices and for many applications the device choice is relatively easy. However, there are challenges to selecting the optimal precision op amps for implementing many higher-end sensor-input processing designs. By Tamara Schmitz, Senior Principal Applications Engineer and Global Technical Training Coordinator at Intersil Corporation.

Intersil has introduced a new active power factor controller that delivers minimal harmonic distortion and high power factor correction. The ISL6730A features a patent-pending breakthrough in negative capacitance technology which reduces EMI filter size, improves THD and PF and provides maximum efficiency over a wide input supply range and output power (input voltages from 85VAC to 270VAC and power range from 50W to 2kW).

Intersil has today announced plans to introduce its latest PowerNavigator digital design system at this year's APEC in Long Beach March 17-21, booth 619. The PowerNavigator GUI offers a single software platform for all PMBus-enabled Power Management products at Intersil, meeting all user requirements with complete design editing from design start to hardware implementation.

Intersil has today announced that it will feature its most innovative digital power technology at this year’s APEC in Long Beach March 17-21, booth 619. Intersil will introduce its latest version of the proven, popular PowerNavigator digital design system at the conference as well as the ZL8101 digital power management solution.

Intersil today introduced its newest digital power supply management solution, featuring automatic compensation and adaptive performance optimization algorithms that significantly improve power conversion efficiency.

Intersil introduce a new dual PWM + linear controller that delivers the industry’s most flexible, efficient power solution for a broad variety of broadband and networking applications. The ISL6446A integrates complete control, monitoring and protection functions for two synchronous buck PWM controllers and one linear controller. It allows designers to easily convert 4.5V to 24V DC into as many as three output voltages, with extensive protection...

Intersil has joined with Renesas to develop a sensor signal conditioning solution for thermocouple, pressure and strain gauges. The companies have demonstrated the new solution, which is being distributed through Avnet Memec, at Embedded World February 26-28 2013 in Nuremberg, Germany.

Intersil have today announced that they will demonstrate new thermocouple and strain gauge designs using a convenient “DAQ on a Stick” at Embedded World 2013. The “DAQ on a Stick” is a reference design highlighting Intersil’s precision products with different microcontrollers.

Intersil Corporation has joined Freescale Semiconductor to develop a new thermocouple and strain gauge application solution that delivers excellent high precision measurement coupled with fast, low power data processing for advanced designs.

Intersil Corporation today announced that they will be restructuring initiatives designed to prioritize the company's sales and development efforts, strengthen financial performance and improve cash flow. The restructuring plans will be substantially completed during the first quarter of 2013 and are expected to reduce annual operating expenses by approximately $30 million.

Intersil Corporation has introduced two new LED driver controllers that not only operate in critical conduction mode (CrCM) but also deliver the industry’s highest efficiency and dimming performance in industrial and commercial lighting systems.

Intersil have today announced the introduction of a new integrated, ultra low noise 24-bit ADCs with programmable gain amplifiers that provide optimal measurement accuracy over a wide range of conversion rates with a minimum of external components. The ISL26102 and ISL26104 are 24-bit ADCs that offer an on-chip ultra-low noise programmable gain amplifier.

Intersil Corporation today introduced a family of boost converters delivering exceptional power density and efficiency. These new boost converters are ideal for single-cell Li-Ion powered products incorporating USB ‘on-the-go’ (OTG) capability.

See the amazing thermal performance of Intersil's new ISL8225M, the industry's best thermally performing single 30A/dual 15A power module. This simple to design in module can deliver up to 100W of power from a tiny 17mm sq. QFN package.

Intersil Corporation today announced the ISL8225M, the industry’s first 30A fully-encapsulated power module. The ISL8225M features the industry’s highest power density and dramatically simplifies the design of high-performance board-mounted power solutions. The ISL8225M can deliver up to 100W output power from a small 17mm square PCB footprint. The two 15A outputs may be used independently or combined to deliver a single 30A output.

Intersil have today extended its central office DSLAM market product portfolio with the introduction of the ISL1561, the most power-efficient Class G line driver. Designed for existing and emerging xDSL central office reference designs with significant improvements over Class H solutions, the ISL1561 provides backward compatibility to existing +14V systems. Its industry leading design supports another 10% power savings in emerging +12V single sup...

Intersil have today announced the release of a new robust, compact ORing FET controller that provides power redundancy and protection with minimal power dissipation. The new ISL6146 works with N-channel power MOSFETs to increase power distribution efficiency when replacing a power ORing diode in high current applications. It can be used to provide an N+1 ORing power supply function, along with complete fault reporting for intelligent monitoring.

Intersil today introduced the expansion of the industry leading “HIP” portfolio of MOSFET bridge drivers for power supply and motor drive applications. This family of 100V, 2A, high frequency half-bridge drivers provides the shortest rise/fall times, adjustable dead-time control and flexible control outputs.

Intersil today expanded its family of radiation hardened op amps with a quad precision version featuring the industry’s best combination of low noise, low power consumption, high precision and high DC accuracy. This product expands Intersil’s radiation hardened op amp portfolio beyond the already released dual op amps, ISL70218SRH and ISL70227SRH, which have similar performance.