GOEPEL electronic GmbH recently introduced a wide range of innovations in all of its AOI systems. All offline and inline OptiCon series AOI systems feature the new software version OptiCon PILOT 5.2, characterised by numerous new functions. The improved ease of use during program generation and optimization is one of the key features.

GOEPEL electronic introduces OsCAR light, a cost-efficient versatile functional car seat test system that can be configured for specific test requirements and UUT (unit under test) with minimal modification and reprogramming effort. The system can be used to test each car seat of each automobile manufacturer. It can also be configured for special UUTs.

At the SMT/Hybrid/Packaging 2012 GOEPEL electronic presented its enhanced AOI system OptiCon THT-Line for integration in THT production lines. The inspection system ready for manual loading can now be directly integrated in the production flow of PCBs with through-hole technology.

GOEPEL electronic introduced RAPIDO, a new family of multi-site inline programmers designed for high-speed in-system programming (ISP) of non-volatile memory devices such as Flash, serial EEPROM, micro controller units (MCU) and programmable logic devices (PLD). RAPIDO is based on the award-winning SCANFLEX architecture, supporting the latest Embedded System Access (ESA) technologies.

At the Boundary Scan Days Germany, GOEPEL electronic introduces ChipVORX Module, a special FPGA based I/O module product range. The new modules are controlled via a standard TAP enabling the opening of the entire ChipVORX eco system of test and programming IPs for external instrumentation.

Multidimensional test and inspection technologies are the focal aspect of GOEPEL electronics’ show appearance at this year’s SMT/Hybrid/Packaging in Nuremberg/Germany. The trade show will be used to introduce additional world premiere solutions.

GOEPEL electronic announces the extended incorporation of Peak Production Equipment Ltd., into the global alliance program GATE (GOEPEL Associated Technical Experts). The focus of the cooperation is the development and practical implementation of new products based on combined functional and JTAG/Boundary Scan test as well as enhancements in the integration of JTAG/Boundary Scan products in existing test systems built by Peak, allowing a total te...

GOEPEL electronic announces the extended incorporation of TBG Solutions into the global alliance program GATE (GOEPEL Associated Technical Experts).

GOEPEL electronic announces the availability of a new Board Merger within the frame of the Boundary Scan software platform SYSTEM CASCON. The newly developed tool generation for the first time supports a completely project oriented definition of the multi board target architecture, subsequently enabling the automatic generation of a consistent project database while maintaining original signal designations and board characteristics. The new featu...

GOEPEL electronic introduces PXI 6161, currently the only worldwide PXI communication controller supporting MOST150 standard. Software and hardware are offered on a single-source basis allowing users the flexible configuration required for their individual requirements. A Break out Module as an optional accessory facilitates the connection of additional resources such as the Electronic Control Line (ECL) or trigger lines. In addition to the PXI v...

GOEPEL electronic recently demonstrated the series version 4.6 of its Boundary Scan software platform SYSTEM CASCON holistically supporting all Embedded System Access (ESA) technologies. The new release fundamentally extends the software platform’s focus towards the overall paradigm change to non-intrusive test and programming procedures. Therefore, SYSTEM CASCON was complemented by a series of basically new system tools and features in particu...

GOEPEL electronic announced it is a new member in the ARM Connected Community, the industry’s largest ecosystem of ARM technology-based products and services. As part of the ARM Connected Community, GOEPEL electronic will gain access to a full range of resources to help it market and deploy innovative solutions that will enable developers to get their ARM Powered products to market faster.

GOEPEL electronic introduces ESA Coach, a special evaluation and training kit supporting Embedded System Access (ESA) technologies. The new demonstration board enables the practical training of all Embedded System Access technologies such as Boundary Scan, Processor Emulation Test and Chip Embedded Instruments by means of respective tutorials, additionally allowing for the development and validation of individual Intellectual Properties (IP).

GOEPEL electronic will be present again at this year's IPC APEX in San Diego, CA, exhibiting the latest JTAG/Boundary scan solutions and industry leading AOI, AXI, and THT inspection solutions at booth # 2450.

Offering a cost effective entry-level module, GOEPEL electronic has expanded its wide range of LIN communication controllers for testing electronic control units (ECU). The PXI 3078 module provides two LIN bus or K-Line interfaces. LIN specifications 1.3, 2.0 and 2.1 are supported.

GOEPEL electronic announces the extended incorporation of the Finnish Company BASS Solutions into the global alliance program GATE (GOEPEL Associated Technical Experts). The development and practical implementation of new solutions, products and modules based on JTAG/Boundary Scan instrumentation as well as enhancements in the local support, applications and integration of the leading JTAG/Boundary Scan hardware solutions SCANFLEX and SCANBOOSTER...

GOEPEL electronic announces the availability of additional features in its EDA software TAPChecker for the generation of BSDL test benches. The newly developed options extend the software’s flexibility in terms of handling pin groups and complex port declarations for improved coverage of multi-chip modules and 3D chips. Users are now able to assign special vector sequences to complete port groups or to adopt complex bus structures into the simu...

Using the slogan „Get the total Coverage!“, GOEPEL electronic has been positioning as vendor of innovative electronic and optical test and inspection systems helping to achieve the highest possible test coverage for electronic assemblies for several years. During Productronica trade show, the Company will again demonstrate how to detect nearly every fault by combining and integrating several test methods. GOEPEL electronic will not only appea...

GOEPEL electronic announces the introduction of a special LAN server feature for its hardware platform SCANFLEX. The new option enables the utilization of a preconfigured GBit LAN interface for high-speed transfer of very large Flash images up to several GBit for in-system programming without additional components. Now the functional interface test as well as high-speed data transfer can be implemented on the same hardware platform. Customers ben...

Within the framework of the goJTAG initiative GOEPEL electronic has developed a new demonstration kit. In addition to the USB 2.0 controlled Boundary Scan controller PicoTAP and respective software, it contains a specific demo board for practical exercises. The networking founded by various universities and the Company Testonica Lab pursues the goal to provide the industry JTAG/Boundary Scan tools and knowledge based on an independent and non-...