Count On Tools Inc
- 2481 Hilton Dr., Suite 3
Gainesville
GA 30501
United States of America - +1 770-538-0411
- http://www.pbtools.us
Count On Tools Inc Articles
Nozzle enables accurate & repeatable chip placement
Based on a proven design used in SMT equipment for over a decade, Count On Tools has introduced the Quad 01005 Ceramic Nozzle. The micro-component nozzle for Quad machines measures 0.32mm OD with a 1.00mm ID. It enables highly accurate, repeatable chip placement for 0201/01005 micro-components.
Count On Tools offers discontinued 702/902 nozzles
Phased out in January 2013, the discontinued 702/902 nozzle for ASM Siplace equipment is being offered by Count On Tools. Due to higher customer demand, COT continued production of the nozzles in anticipation of customers still seeking to use the 702/902 nozzle geometry for 0201 (0.6x0.3mm) and 0402 (1.0x0.5mm) components in their pick-and-place equipment.
Count On Tools scoops third award for StripFeeder System
At the 2014 NPI Awards, Count On Tools scooped an award for their StripFeeder Modular System version 2. Awarded in the category of Automation Tools, the win marks the company’s third award for the StripFeeder Series in the last year.
Support plates provide enhanced support for heavy loads
Additional support plates, enabling users to limit the movement of the ESD-safe foam fingers while shortening the compression height, has been announced by Count On Tools for their line of ezLOAD Board Supports. The ezLOAD Support Plates are available in 1/4" (0.25) and 3/8" (0.375) heights.
Count On Tools reveal special offers for APEX
Count On Tools has announced two limited time special offers for the IPC APEX EXPO. All STRIPFEEDER .mod V2 kits are 20% off and all ezLOAD modules are buy two, get one free. Valid through to April 30th, 2014, this offer is effective immediately, simply mention coupon code APEX14.
Updated StripFeeder Modular System exhibited
At the IPC APEX Expo, March 25-27, 2014 in Las Vegas, Nevada, Count On Tools will exhibit version 2 of the StripFeeder Modular System in Booth 725. The award-winning StripFeeder is particularly suitable for loading tape-and-reel components onto compact modules for prototyping and high-mix low-volume applications.
Count On Tools Unveils Redesigned StripFeeder Modular System
Count On Tools introduces the next version of its award-winning StripFeeder System for loading tape-and-reel components onto compact modules for prototyping and high-mix low-volume applications. COT was awarded a 2013 NPI Award from Circuits Assembly magazine in the category of Automation Tools for its StripFeeder Modular System.
Count On Tools Launches MYDATA ezTOOL for Midas Tool Tip Replacement
Count On Tools announces the availability of its new MYDATA ezTOOL, an assembly/disassembly fixture for MYDATA Midas Tool Tips. With the new ezTOOL, customers can replace tool tips quickly with precision alignment for critical pick-and-place tooling.
Count On Tools to Introduce Expanded Series of StripFeeder .mod Kits and Accessories at the IPC APEX Expo
Count On Tools will be exhibiting in booth #746 at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. New product lines to be showcased at the event include: The expanded series of StripFeeder .mod kits and accessories as well as the expanded line of ezLOAD modules.
Count On Tools Debuts New Accessories for StripFeeder Modular System
Count On Tools introduces additional accessories for its revolutionary StripFeeder System for loading tape-and-reel components onto compact modules for prototype and high-mix/low-volume applications. The StripFeeder .mod (Modular) System features removable rails that can be mounted to accommodate a wide array of tape sizes in the same feeder.
EKRA ezLOAD Board Support System from Count On Tools
Count On Tools has today announced the launch of the new ezLOAD PCB Support System for EKRA Screen Printers. Count On Tools recognizes the need for more affordable board support options in the electronics manufacturing industry and has delivered an innovative design that is not only easy to setup and install, but also offers industry-leading benefits to electronics manufacturing service providers and contract manufacturers worldwide.
Count On Tools releases low-cost EKRA board support pins
Count On Tools introduces PCB Magnetic Support Pins for EKRA Screen Printers. Count On Tools has recognized the need for more affordable board support options in the electronics manufacturing industry and has delivered a cost-effective solution.
MYDATA Exchange Program re-launched by Count On Tools
Count On Tools announces the re-launch of the MYDATA Exchange Program for new customers. Count On Tools realizes that there are electronics manufacturers with worn or broken MYDATA Midas Nozzles. Now these can be exchanged for a new tool at a discounted cost. For every MYDATA Midas tool sent in, customers are eligible to receive a 30 percent discount toward the purchase of a new tool of the same type
Count On Tools' Contract Machining Services at SMTA International 2012
Count On Tools will exhibit in Booth #211 at the upcoming SMTA International Conference and Expo, scheduled to take place Tuesday October 16 and Wednesday, October 17, 2012 from 9am-5pm at the Walt Disney World Dolphin Hotel in Orlando, FL. roduct lines to be showcased at the event include: LED Nozzle Series, StripFeeder .mod series, the expanded ezLOAD PCB board supports series, and a broad assortment of standard tooling and custom nozzle design...
Custom Nozzle Engineering Breakthrough with Urethane Nozzle Series
Count On Tools has today revealed a breakthrough in custom nozzle engineering for ultra-smooth components from the semiconductor market. The latest series of nozzles feature precision-machined urethane tips that prevent components with very fine surface finishes, such as bare dies and wafer level components, from getting stuck on the nozzle tip during the pick-and-place process.
COT's ezLOAD Board Support System for MPM SPM Screen Printers
COT introduces the new ezLOAD PCB Support System for MPM SPM Screen Printers. The SPM is a very accurate screen printer built for precision batch printing and prototype work. COT has recognized the need for more affordable board support options in the electronics manufacturing industry and delivered an innovative design that is not only easy to setup and install, but also offers industry-leading benefits to electronic manufacturing service provid...
COT expands Manufacturing Operations with a second Zeiss CONTURA G2 CMM
Count On Tools has today revealed another expansion of its manufacturing operations at its Gainesville, GA headquarters. The recent expansion is in response to the growing market for SMT nozzles and consumables as well as the increased demand for its precision contract machining services.
New ezLOAD XL Board Support System from Count On Tools
Count On Tools Inc. introduces the new ezLOAD XL PCB Support System. With the recent increase in densely populated double-sided circuit boards, COT recognized the need for more affordable board support options in the electronics manufacturing industry.
Count On Introduces PB Swiss Tools’ Rainbow Parallel Pin Punch Tools
Count On Tools Inc. announces that PB Swiss Tools introduced new rainbow colour-coding for its Parallel Pin Punch Tools, making them easy to quickly locate, assign and safely apply the right tool. Smart improvements and continued developments supplement its existing assortment. The colour-coded features of PB Swiss Tools’ Rainbow Series set them apart from the rest by giving an indication of size to every tool.
Count On Tools Inc. Unveils Redesigned StripFeeder Modular System
Count On Tools Inc. introduces the latest version of its revolutionary StripFeeder System for loading tape-and-reel components onto compact modules for prototyping and high-mix low-volume applications. The StripFeeder trays are compatible with both paper and emboss tape simultaneously, and are ideal for low-volume high-mix applications and prototyping.