CML Microcircuits has announced a product from its Sicomm Technologies design centre. The SCT3258TD is a highly integrated baseband solution that includes both DMR and dPMR standards. As well as providing full support for the DMR and dPMR protocol stacks, the device is differentiated from CML’s other baseband processors by embedding multiple low rate vocoders including AMBE+2 (Digital Voice Systems Inc.) and RALCWI (CML’s proprietary ...

The release of the CMX975 - 2.7GHz Up/Down Converter has been announced by CML Microcircuits as it expands its RF Building Block IC range. The CMX975 is an enabler for small form factor high frequency RF transceiver designs, operating up to 2.7GHz, that require high performance and low power consumption; in a small form factor.

CML Microcircuits has expanded its RF Building Block product line with a three-stage wideband, high-gain, high-efficiency RF Power Amplifier IC operating across a wide 130MHz to 700MHz frequency range, the CMX902 IC which combines high gain and high efficiency with small footprint.

Further expanding the company’s RF portfolio, CML Microcircuits has announced the release of the CMX979 Dual PLL + VCO IC. The CMX979 is a low power dual RF/IF synthesiser + VCO that provide signal generation over a wide range of frequencies. It directly supports both single conversion and super-heterodyne radio architectures and minimises the number of external components needed. The CMX979 provides the designer a solution to develop small...

CML Microcircuit has announced the release of a new range of RF Building Blocks: RF Power Amplifiers. The CMX901 is the first product in its range to be released and is a three-stage wideband, high gain and high efficiency RF power amplifier IC operating over 130-950MHz. 

Following the announcement of its parent company in the acquisition of Sicomm Technologies, a leading Chinese ASIC design house, CML Microcircuits is set to expand its Digital Mobile Radio (DMR) market penetration.

CML Microcircuits has announced the release of a new CMX7261 Function Image implementing the G.723.1 digital voice coding algorithm of VoIP applications. The CMX7261 provides a complete end to end function with dual channel encoding, decoding, transcoding with no external DSP or DSP skills required. The device is ideally suited to software-defined radio (SDR), voice-over IP (VoIP) applications, wireless private branch exchange (PBX) and digi...

A provider of low-power semiconductor solutions for global wireless data and two-way radio communications markets, CML Microcircuits, has further enhanced the Function Image suite of its CMX7241/CMX7341 PMR Common Platform Processors. All major PMR systems are now supported: DMR, dPMR, NXDN, ARIB STD-T102, ARIB STD-T98 and legacy Analogue PMR, all with automatic digital/analogue detection.

  CML Microcircuits announces that it has added a wideband mode to the CMX983 AFE IC that bridges the gap between a digital radio’s RF section and the DSP/FPGA. The 50kHz wideband mode opens up new high speed data application areas in satellite and terrestrial wireless telemetry systems.

The release of the new CMX7261 Function Image from CML Microcircuits also incorporates the G.723.1 digital voice coding algorithm of VoIP applications. The CMX7261 provides an end to end function with dual channel encoding, decoding, transcoding with no external DSP or DSP skills required. The device is well suited to software defined radio (SDR), voice over IP (VoIP) applications, wireless private branch exchange (PBX) and digital voice int...

Expanding the functionality of its CMX7164 multi-mode wireless data modem, CML Microcircuits has announced Adaptive Coded Modulation (ACM) capabilities. These new features allow modulation type and block format to change on the fly to dynamically select data block size, coding rate and CRC size.

CML Microcircuits has announced the introduction of the CMX994E enhanced performance Direct Conversion Receiver IC. The CMX994E provides an optimum solution for a Software Defined Radio (SDR) approach to developing a state-of-the-art P25 radio. The device provides a flexible solution that can be used as a direct or single conversion receiver from RF directly down to zero-IF, near zero-IF or low IF.

CML Microcircuits has released a DMR (Digital Mobile Radio) chipset solution. The DMR chipset comprises a low power RF Direct Conversion Receiver (DCRx) IC (CMX994A) and a PMR Common Platform Processor (CMX7341) with the DMR Air Interface and coding embedded within a Function Image. The CMX994A and CMX7341 chipset along with DMR (7241/7341FI-2.x) Function Image enables a highly integrated radio to be developed quickly, cost effectively and provid...

CML Microcircuits has released the CMX994A and CMX994E Direct Conversion Receiver (DCRx) ICs. The CMX994A and CMX994E are RF receiver ICs featuring I/Q demodulators with low power consumption and high performance features. These devices are targeting next-gen narrowband and wideband SDR for wireless data and two-way radio applications.

CML Microcircuits has released the V.23 Modem Function Image, further increasing the capabilities of the company's CMX7164 Multi-mode Wireless Data Modem portfolio. The V.23 modem enables communication with legacy Telecom systems to support 1200 baud 1 to 8B data blocks with start bit, stop bit and parity generation in transmit and start bit, stop bit and parity checking and removal in receive.

Designed to support digital/analogue FDMA PMR/LMR and 2-slot TDMA digital systems, a PMR common platform processor has been introduced by CML Microcircuits. Alongside the on-going requirement for a radio platform to support legacy analogue, a number of digital FDMA and TDMA PMR/LMR systems have emerged during the migration of Two-way Radio from analogue to digital. 

CML Microcircuits announced that it has added 16-FSK modulation to the CMX7164 multi-mode wireless data modem portfolio. The addition of 16-FSK constant envelope modulation further enhances the flexibility of this modem IC, enabling telemetry systems to evolve into higher data throughput without the need to move to a linear modulation scenario.

Specifically designed to meet the needs of a Software Designed Radio (SDR), the CMX983 Analogue Front End (AFE) IC has been announced by CML Microcircuits. Highly configurable, supporting numerous sample rates and filtering characteristics, the AFE bridges the gap between a digital radio’s RF section and the DSP/FPGA.

Boasting an embedded Air Interface (AI) Protocol, the NXDN Processor has been launched by CML Microcircuits. The CMX7131/7141 with the NXDN Function Image connects directly to the market-leading CMX994 Direct Conversion Receiver IC.

A Systems Group, formerly known as Applied Technology Ltd, has been established within CML Microcircuits. The Systems Group is an engineering organisation specialising in performance RF design and DSP software.