Artila Electronics has introduced a new IoT Gateway Matrix-704 featuring with Isolated / Surge-protected Serial ports that secure the data transmission to increase system reliability in a wide range of demanding industrial applications.

Artila Electronics has launched the FreeRTOS based serial to wireless LAN module. SW-200M supports 2.4GHz, IEEE 802.11b/g/n WiFi and UART interface which is designed to connect serial device to Intranet/Internet. This module provides serial to embedded wireless solution with 40x45mm compact PCB size, and ultralow power consumption features.

Artila Electronics has announced its new SODIMM module based on NXP i.MX6ULL ARM Cortex A7 CPU core operating up to 800MHz speed with Linux OS. The new M-X6ULL is designed to meet the needs of many general embedded applications that require power efficient, high performance and cost optimised solution, as well as embedded systems that require high end multimedia applications in a small form factor, this cost effective M-X6ULL is ultra-compac...

  Developer and manufacturer of Linux-ready ARM embedded industrial computers, Artila Electronics has announced its RIO-2017PG, the high performance, compact remote I/O modules interface with up to eight isolated A/I channels.

With the dissemination of Internet around the world changed the way people communicate, and the evolution of the information and communication technology it has allowed the creation of new types of services involving electronic devices with huge potential. The Internet of Things (IoT) offers new possibilities and new services to end users, since they could learn more about other entities present in the surrounding environment.

Artila Electronics has announced the Single Port Serial-to-Wifi gateway. Named Aport-213, which is now available on the market. Aport-213 is a suitable choice that provides connectivity for your serial devices, such as meters and sensors to 802.11 Wireless Local Area Networks (WLANS). Eliminating the need for the development of a wireless LAN driver and security supplicant, it is suitable for minimising upfront engineering investment an...

Artila Electronics has released the Matrix-700, Cortex-A5 based industrial embedded Linux computer. Matrix-700 is fanless, has long term stability, faster flash memory, flexible input/output function and smaller dimension. It is powered by a ATMEL 536MHz ATSAMA5D35 Cortex-A5 CPU which is equipped with 512MB SDRAM, 8MB Flash and is suitable for 24/7/365 non-stop running for unmanned application environment. 

A controller module has been released by Artila Electronics. RIO-2015PG, the FreeRTOS programmable remote I/O module. RIO-2015PG is powered by a 32-bit Atmel SAM4E16E 120MHz ARM Cortex M4 processor which is equipped with 256kB SRAM, 3MB Flash and FreeRTOS real time operating system.

A next-gen web enabled data acquisition and control module with MQTT support has been introduced by Artila Electronics. MQTT is a lightweight publish/subscribe messaging protocol which is an OASIS standard and is suitable for sensor and device communication with low network bandwidth.

Designed for applications of remote device management which require a reliable wired and wireless communications, the Matrix-513 is the latest release from Artila. Providing a low power but but powerful computing device, the Matrix-513 comes with two MiniPCIe slots which can accept COTS Wireless LAN, Bluetooth, GPS and cellular 3G MiniPCIe cards.    

Artila Electronics is proud to announce the support of remote desktop control for Linux and WinCE on its M-9G45A System on Module.

Artila is today pleased to introduce the M-9G45A, an ARM9 System on Module supporting Linux and WinCE. M-9G45A is a credit card size system on module powered by 400MHz AT91SAM9G45 ARM Thumb Processor with memory management unit, and equipped with 128MB DDR2 RAM, 128MB NAND Flash, and 2MB DATAFlash.

Artila Electronics is proud to announce the launch of M-506, an ARM9 Linux-based Single Board Computer. M-506 is a standard 3.5” form factor ARM9 Linux-based Single Board Computer powered by 400MHz AT91SAM9G45 ARM Thumb Processor with memory management unit, and equipped with 128MB DDR2 RAM, 128MB NAND Flash, and 2MB DATAFlash.

Artila Electronics is proud to announce the launch of PAC-4000, DIN-Rail mounted Industrial ARM9 Embedded Computer. PAC-4000 is a fanless DIN-RAIL mounted industrial computer which is powered by 400MHz ARM9 ATMEL AT91SAM9G20, 64MB SDRAM and 128MB NAND Flash memory. PAC-4000 comes with two Ethernet ports, up to four RS-232 ports and two isolated RS-485 ports, two USB host ports and one microSD socket.

The M-502 Industrial Linux-based ARM9 System on Module, designed by Artila Electronics, was selected for an Editor’s Choice award in PC/104 and Small Form Factors Magazine’s Spring 2011 issue. Artila Electronics is the leading designer and manufacturer of Linux-ready ARM9 industrial solutions, and M-502 is the new generation of Artila’s SoM product selection.

Artila Electronics, the leading designer and manufacturer of Linux-ready ARM9 industrial PC, is proud to release Matrix-522 Industrial Linux-ready ARM9 CAN Bus Box Computer, the new design of its ARM9 box computer selection.

Artila Electronics Co., Ltd., an emerging force in embedded networking and computing, announced their PAC-5070, an ARM9-based single board computer with advanced data acquisition capability. The PAC-5070 integrates low power ARM9 SoC, isolated digital and analog I/O, 64MB SDRAM and 16MB flash memory with pre-installed Linux OS into a compact and DIN RAIL mountable module.

Artila Electronics Co., Ltd., an emerging force in the embedded computer solutions field, announced availability of the Matrix-604, a WinCE 6.0 ready industrial box computer based on the new ATMEL ARM9 SoC.