Analog Devices, Inc annonce ce jour sous la référence ADP1046 un nouveau contrôleur de puissance numérique destiné aux alimentations à courant alternatif-continu à haut rendement et continu-continu isolées. L’ADP1046 est un contrôleur flexible doté de sept sorties logiques MLI (Modulation en Largeur d’Impulsion), qui peuvent être aisément programmées par l’intermédiaire du port I²C de son interface graphique. Ce circuit perme...

Afin de répondre aux exigences des concepteurs de systèmes de communication radio et RF, Analog Devices, Inc l’un des premiers fournisseurs mondiaux de semi-conducteurs pour applications de traitement de signal de hautes performances, annonce ce jour l’introduction de l’amplificateur de commande RF 0,5 W ADL5324. Par rapport à d’autres amplificateurs de commande RF, l’ADL5324 affiche un rendement énergétique supérieur et une meil...

Analog Devices, Inc. today introduced the ADP1046 digital power controller for high efficiency AC-to-DC and isolated DC-to-DC power supply systems. The ADP1046 is a flexible controller with seven PWM (pulse width modulation) logic outputs that can be easily programmed using an easy-to-use graphic user interface (GUI) with I2C interface.

To meet the needs of today’s radio and RF communication equipment designers, Analog Devices, Inc. (ADI) today introduced the ADL5324 half-Watt RF driver amplifier. When compared to other RF driver amplifiers, the ADL5324 offers superior power efficiency and temperature tolerance. The ADL5324 operates over a wide temperature range (-40°C to +105°C), and can be biased to operate on less power.

Analog Devices, Inc. has announced that it has acquired Multigig, Inc., a small, privately-held San Jose, California, company specialising in highly innovative high-performance clocking technology. The acquisition will enhance ADI’s clocking capabilities in stand-alone and embedded applications, and will strengthen ADI’s industry-leading position in delivering high-speed data converters and signal processing solutions for our customers

Analog Devices, Inc., today introduced a single-chip energy measurement AFE (analog front end) that monitors the energy consumption and power quality of up to six electrical circuits. The ADE7816 energy measurement AFE is designed for data centre power distribution units, energy monitoring and management systems, and multi-channel electricity meters.

Watch how two engineers use Analog Devices' Circuits from the Lab to help solve their design challenge. From test data to hardware evaluation, to project integration, we make it easy to save time while lowering the risk in your circuit design.

Analog Devices, Inc. today announced that Lantronix, Inc. has selected ADI’s iCoupler digital isolator technology to enable its new family of wireless communication network servers. The EDS-MD family of multiport medical device servers represents the latest in healthcare communications by providing remotely controlled system-level management of multiple medical devices in a compact, secure and lightweight plastic enclosure.

Analog Devices, Inc. will showcase innovative patient monitoring solutions and vital sign monitoring technology for the healthcare industry at DesignMED 2012. ADI’s booth is located at Hall 2, Stand 2211.

Analog Devices, Inc. today announced the release of a new version of its popular ADIsimRF design tool. ADI’s ADIsimRF design tool is the software accompaniment to Analog Devices’ complete portfolio of RF-to-digital functional blocks, allowing engineers to model RF signal chains using devices from across ADI’s RF IC and data converter portfolio. ADIsimRF Version 1.6 adds support for 29 new RF ICs and data converters as well as functional enh...

Analog Devices has launched a new family of MEMS microphones with the lowest noise floor in the industry. Learn about the first member of this family, the ADMP504, and how these microphones can give your design a competitive edge.

Analog Devices, Inc. introduced today the high-performance ADMP504 featuring the industry’s lowest-noise MEMS microphone. Delivering an SNR (signal-to-noise ratio) of 65-dBA, or 29-dBA EIN (equivalent input noise), the ADMP504 provides the same SNR performance as an array of two individual 62-dB SNR microphones. In addition, the ADMP504 provides an extended frequency response up to 20 kHz and a high PSR (power-supply-rejection) of 70 dBV.

Analog Devices, Inc. today introduced an 11-bit D/A converter that enables cable television and broadband operators to synthesise the entire cable spectrum up to 1 GHz into a single RF port, while consuming a maximum of 1.1 W of power. The AD9737A 2.5-GSPS D/A converter’s wide bandwidth and dynamic range enable cable infrastructure designers to increase QAM (quadrature amplitude modulation) channel density by 20 times over present cable modem ...

Analog Devices l’un des premiers fournisseurs mondiaux de semi-conducteurs pour applications de traitement de signal de hautes performances, annonce ce jour sous la référence ADP2164 un nouveau régulateur continu-continu à sortie 4 A sous 6,5 V, qui affiche une efficacité de conversion supérieure à 96 pourcent. Ce régulateur à haut niveau d’intégration fonctionne dans la plage de tension d’entrée comprise entre 2,7 et 6,5 V pour ...

Analog Devices, Inc. today introduced the ADP2164, a 6.5-V, 4-A output DC-to-DC regulator featuring a high conversion efficiency of greater than 96 percent. The highly integrated ADP2164 regulator offers an input voltage supply range of 2.7 V to 6.5 V, an output range as low as 0.6 V and includes low on-resistance switching FETs to maximise efficiency while reducing board space. The ADP2164 provides very high efficiency in a compact 4-mm x 4-mm Q...

The ADXL103/ADXL203 are high precision, low power, complete single- and dual-axis accelerometers with signal conditioned voltage outputs, all on a single, monolithic IC. The ADXL103/ADXL203 measure acceleration with a full-scale range of ±1.7 g, ±5 g, ±18 g. The ADXL103/ADXL203 can measure both dynamic acceleration (for example, vibration) and static acceleration (for example, gravity).

The ADXRS622 is a complete angular rate sensor (gyroscope) that uses the Analog Devices, Inc., surface-micromachining process to make a functionally complete and low cost angular rate sensor, integrated with all of the required electronics on one chip. The manufacturing technique for this device is the same high volume BiMOS process used for high reliability automotive airbag accelerometers.

The ADXL278 is a low power, complete, dual-axis accelerometer with signal conditioned voltage outputs that are on a single monolithic IC. This product measures acceleration with a full-scale range of (X-axis/Y-axis) ±35 g/±35 g, ±50 g/ ±50 g, or ±70 g/±35 g (minimum). The ADXL278 can also measure both dynamic acceleration (vibration) and static acceleration (gravity).

The ADXL180 iMEMS accelerometer is a configurable, single axis, integrated satellite sensor that enables low cost solutions for front and side impact airbag applications. Acceleration data is sent to the control module via a digital 2-wire current loop interface bus. The communication protocol is programmable for compatibility with various automotive interface bus standards.

The ADXL78 is a low power, complete single-axis accelerometer with signal conditioned voltage outputs that are on a single monolithic IC. This product measures acceleration with a full-scale range of ±35 g, ±50 g, or ±70 g (minimum). It can also measure both dynamic acceleration (vibration) and static acceleration (gravity).