Saelig Debuts Universal USB Controller with 50 I/O Pins

IO-Warrior56 offers a simple access to the USB since it has been designed as a generic HID device - the protocol is all in the IO-Warrior56 chip. Only a few simple lines of code are needed to access the I/O pins. If you need to connect simple devices to a computer, like relays, switches, keypad, or a small display, IO-Warrior56 is a simple solution. Working with USB used to mean that you had to develop specific code for a USB-enabled microcontroller, developing a unique driver with lots of documentation, using expensive development systems. Now driving LCDs, LEDs, or keypads from USB is easy! IO-Warrior56 also supports a range of industrial standard interfaces such as I2C and SPI to simplify interfacing to chips, modules, or displays.

Features: · Full Speed USB2.0-compliant interface (12MBit/sec) · 50 general purpose I/O Pins, typ. 1000Hz rate (input or output) · I2C master function, 50, 100, or 400kHz · SPI master interface, up to 12MBit/sec, throughput up to 62Kbytes/sec · Controls various display modules, including most graphic modules · Drives up to 8x64 LED matrix · Drives 8x8 switch or button matrix · Software support for Mac(10.2 and up), Linux (Kernel 2.6), and Windows (2K/XP/Vista/7) · No USB knowledge needed · Single +5V power supply (50mA operating, 25μA suspend) · 0.1-spaced 56-pin module. · Extended temperature range: -40°C to +85°C