Low clamping bidirectional ESD protection devices delivered for USB4 standard interfaces

“Since there are tight budgets on insertion loss and return loss for the USB4 Super Speed lines, Nexperia supports design engineers by offering devices that minimise the impact of ESD protection on the total budget,” said Stefan Seider, senior product manager at Nexperia. “By providing these two device options, engineers can balance between ESD voltage clamping (that is protection level) and RF performance.”

The PESD5V0R1BDSF is optimised for low clamping and offers low insertion loss figures of ‑0.28 dB at 10 GHz and similarly low return loss figures of ‑19 dB at 10 GHz. The PESD5V0R1BCSF, on the other hand, is optimised for RF performance with insertion loss data of -0.25 dB and return loss data of -19.4 dB at 10 GHz each. This makes it ideal for applications with further limited budgets for insertion loss and return loss.

Both devices are housed in the ultra-low inductance DSN0603-2 (SOD962-2) leadless package, with a standard 0.6 mm x 0.3 mm footprint and 0.3 mm profile, with return-loss optimized solder pads. For USB4TM, it is mandatory to have AC-coupling capacitors also for the receiver (Rx) inputs. The voltage rating V_RWM of the PESD5V0R1BxSF devices (>2.8 V) allows them to be placed directly behind the connector, which is the preferred position to include these capacitors in the protection and to achieve best system-level ESD performance. This voltage rating makes them backwards compatible with all standards that canconnect over USB Type-C. Along with USB4, this includes USB 3.2, the older USB3.x as well as Thunderbolt and HDMI2.1 (in HDMI Alt Mode) data lines, with HDMI2.1 data rates being supported up to 48 Gbps (4 x 12) and ThunderboltTM up to 40 Gbps (2 x 20). At the same time, TrEOS technology ensures very low ESD voltage clamping to protect sensitive transceivers.

For more information on the new PESD5V0R1BxSF ESD protection devices, including product specifications and datasheet, click here.