Communications

A new ‘building block’ for fibre cabling to speed up UK roll-out

12th September 2023
Kristian McCann
0

Deployments of full fibre broadband networks in urban and rural areas across the UK will be made quicker and easier thanks to a new ultra lightweight (ULW) fibre cable constructed with ACOME Group’s patented nanomodule technology.

The cable, designed specifically for urban and rural aerial use in the UK market, can fit 96 fibres in each module, whilst maintaining modules of 12 fibres. This means that network builders can deploy more fibre in the same diameter of cable. ACOME’s nanomodule technology removes the restraints of aerial cables’ 7mm size, which typically limits them to a maximum of 48 fibres.

The new 96-fibre cable also addresses key pain points that installers face helping to reduce installation times by an average of three hours and countless hours off maintenance times for every kilometre of cable deployed. This is because the cable is grease and gel free, making it easy to handle and install and eliminates the need for fibre cleansing. The cable is also kink free.

The elimination of sealing gel or grease, typically used on cables for an additional layer of protection, negates fibre cleansing, reducing the fibre preparation times. This includes reduced splicing times compared to conventional cable designs which results in significant cost savings and ultimately mitigates the cost of the cable itself. It also reduces the risk of damage to the fibre and racks where they are placed.   

“The nanomodule is a new building block for making optical fibre products, opening the gateway for new products that were not previously possible” said ACOME key account manager, Lee Spicer. “Our focus at ACOME is to make it as easy for the installer as possible and we are delighted to be announcing it to the market at a time when network builders are trying to make their roll outs as efficient, quick, and cost-effective as possible.”

The product was developed following the success of the 72-fibre version of ACOME’s nanomodule cable, used by network builders including FullFibre. FullFibre was able to quickly and cost effectively deploy a 26km-long fibre network spine for the region of Hertfordshire. “The density and 12-module structure of the cable allowed us to use existing network infrastructure,” said Technical Delivery Director at FullFibre, Dan Jones. “Without which, we would have had to dig extensively, and the cost and disruption would have been huge.”

Unlike many other products on the market the 96-fibre new cable is constructed with modules of 12-fibres - mirroring the architecture of existing fibre infrastructure. Using a 12-fibre module makes it less complicated for installers to identify the colour of the cable being put into a rack in comparison to a 24-fibre module.

The nanomodule design also saves thousands of pounds per kilometre deployed in cost savings and one ton of carbon per three kilometres of cables that are installed, calculated by ACOME. For example, comparing the deployment of a 96-fibres ULW cable with two 48-fibres cables, not only are installation times halved, but the carbon footprint of the deployment is reduced by 24 %. As the technology does not require any fibre cleaning solvents, operators can avoid waste pollution from both the sealing and cleaning substances that are needed to maintain traditional cables.

“At ACOME, our main target for the company is to become sustainable which is why we have taken a leading role in the FTTH Council Europe’s Carbon Footprint project that aims to measure the industry’s global footprint and bring sustainability values to the fibre industry,” said Willy Pelhate, Marketing Manager UK at ACOME Group. “We are pleased to be able to continue our commitment towards this initiative with our 96 fibre ULW cable that is offering operators a sustainable alternative to their fibre deployments.”

The product essentially removes all extraneous materials, increasing the density of the cable between 80 and 100% when compared to traditional cable designs.

The 96-fibre ULW cable has been built with PIA compliance in mind, being able to maintain modules of 12-fibre, thanks to the density of the nanomodule technology – which is 30% smaller than traditional cables. This avoids additional fibre management on splice trays and the need for the fibres to be ring marked.

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier