SIM Block Card Reader with Separate Switch

29th September 2009

ES Admin

0 0

Datasheet

Yamaichi Electronics now offers with the FMS008-4000-xx connector a variable reading system for SIM and Smart cards. The card reading system’s basis is a 8-pin SIM block card reader which is special because of its low assembly height of 0.95 mm. This low profile allows for an embedded assembly processing, i.e. the card reader is embedded into the PCB. This feature significantly facilitates the insertion of the cards and additionally reduces the load on the SIM or Smart cards in use.

The possibility of using the card reader together with a separate switch is a special advantage. The need for a switch depends on the end-user’s requirement of having a card recognition switch or not. According to the card application the switch can be mounted on the PCB in different positions independently from the card reader.

A highlight feature is the high contact durability of 10,000 mating cycles not only for the card reader but also for the switch. Thus the system is especially suitable for applications with high mating cycles.

The card reader and the switch can be SMT soldered either on the top or reversed side of the PCB. Therefore they apply to cards for top or reversed side usage. The system is delivered with tape and reel packaging.

Yamaichi Electronics do not only offer this low size component but a wide range of card connectors for all available Flash and SIM card types with different form factors like microSD, miniSD, SD, RS-MMC, MMCmicro, MMC, CompactFlash, xD etc., as well as multicard versions.