CAN FD Integration on PCBs
A simple possibility of implementing CAN FD in custom hardware designs is now offered by PEAK-System with the stamp module PCAN-Chip USB. The connection to the circuits is enabled via USB 2.0. The actual used physical CAN transmission is determined by the transceiver to be implemented by the developer.
The stamp module has side lengths of 25 by 20mm and is suitable for automatic insertion due to the single-sided component placement and the half-hole edge contacts. It can be operated in environments with the extended temperature range of -40 to +85°C (-40 to +185 °F).
For the design phase, an evaluation board is available that provides a reference circuit of the stamp module. It contains connectors, indicator LEDs, jumpers, switches, and solder fields that can be used for testing purposes. The assembly is documented, among others, with a circuit diagram.
Featured products
MAX17793
Analog Devices Inc.
3V to 80V, 3A, High-Efficiency, Synchronous Step-Down DC-DC Converter
| SKU: | MAX17793 |
|---|---|
| Stock: | 9316 |
| Cost: | $3.64 |
MAX22516
Analog Devices Inc.
IO-Link Data Link Controller with Transceiver and Integrated DC-DC
| SKU: | MAX22516 |
|---|---|
| Stock: | 8000 |
| Cost: | $5.42 |
