Automotive

Electrifying the future of the vehicle market

23rd April 2020
Alex Lynn
0

By 2040, the government’s proposed ‘Road to Zero’ emissions plan will require each new car sold in the UK to have an electric driving range of at least 50 miles. With electric vehicle capabilities in the midst of switching from an environmentally kinder preference to a mandatory requirement, the vehicle market will have to electrify more than just commercial vehicles.

Here, Simone Bruckner, Managing Director of Cressall Resistors, has explained where the market is heading and how it will meet the drive for efficiency. 

Electric vehicles (EVs) represent exciting opportunities for the UK and across the globe. With the potential to reduce emissions in the largest-emitting sector, international market trends suggest that electric cars and vans will reach price equivalency with internal combustion engine (ICE) vehicles by the mid-2020s and that EV sales will overtake petrol and diesel engines by the late 2030s.

Despite this burgeoning expected growth, there are still some important questions that need to be answered surrounding just how manufacturers can guarantee efficiency levels that can outperform those of traditional vehicles.

Going public

Urban electric buses are surpassing the growth of every other EV segment and constitute the fastest-growing part of the EV market.

In China, the once quaint city of Shenzhen has become a megalopolis. Over 40 years, Shenzhen’s population has accelerated from 30,000 citizens to over twelve million. In line with this remarkably rapid transformation, the city began introducing electric buses in 2009 in order to combat rising air pollution. Today, it has become the first city to electrify all of its public buses.

In fact, a report by Bloomberg estimates that China adds around 9,500 buses to its services every five weeks — the size of London’s entire fleet. Elsewhere, Paris has renewed its public bus fleet with 100% electric buses, making it a world leader in sustainable public transport. Over the next decade, most of Europe’s bus fleets are predicted to reap the benefits of electrified transport.

And benefits there are. The cost of maintenance for electric buses is around 25% lower than that of a diesel bus, as the electric motor doesn’t need the same level of servicing that a diesel one requires. Electric engine losses are also significantly lower than a diesel engine’s, lowering the cost per kilometre of electric bus travel.

However, the e-bus phenomenon presents cities with some major challenges: namely technological uncertainty, large up-front investment and the need for new capabilities. It is therefore important that the long-term efficiency of these vehicles outshines their substantial initial expenditure and that the technology is in place to transform potential into reality.

Not only do cities need to revamp their infrastructure, as charging stations could require a full redesign of bus depots, but software solutions must also be considered in order to effectively manage vehicle operations. This may include building IT systems that can monitor and handle a potentially complex web of timetables and charging schedules. Real-time energy system monitoring is also required to prevent malfunctions and delays.

Bear the load

There is also concern over how other heavier vehicles will be electrified. In late 2017, Tesla announced that its Semi heavy electric truck would be ready for production by 2020. Enticing the industry with pledges of a 500-mile driving range and solar-powered ‘Megacharger’ stations, the company certainly has a lot to deliver if it is to act on its promises.

Many people are speculating about the exact specifications of the Tesla Semi. One of the most important items in question seems to be its weight. If the electric vehicle is to require several electric motors in order to power it, this weight would be roughly comparable to that of a diesel engine. With the addition of the truck’s battery weight, the components inside EVs must be refined so that they can bear the load of this extra mass without it impacting efficiency.

Despite slick marketing campaigns and captivating master plans, there is still a long way to go before we see a complete overhaul of heavy vehicles. In 2018, 97% of trucks and 100% of camper vans sold in Europe were diesel powered. To help make ambitions of electric heavy vehicles become a reality, we must assess and perfect the components going into them — and the focus shouldn’t solely be on batteries.

The regeneration game

According to Toyota, the average car is made up of 30,000 parts, right down to each individual screw. These parts must battle adverse weather conditions, withstand repeated bouts of acceleration and braking and proactively contribute to maintaining vehicle efficiency.

Instead of internal combustion engines, electric vehicles use a braking chopper to convert the energy generated by high speed braking, typically when on the motorway. Urban drive cycles have a considerable amount of acceleration and decelerating periods due to traffic control in place around towns and cities. While braking, a car’s motor continues to spin even though the vehicle is trying to slow down, creating excess energy. Integrating a braking resistor allows this otherwise wasted energy to be dissipated as heat and recovered to warm the vehicle’s cabin in cold weather or to regenerate the kinetic energy to improve efficiency.

The concept is widely implemented on electric trains, where wasted energy is dissipated back into the power line and consumed by other trains on the track. On the road, regenerative brakes can not only significantly improve energy efficiency, but can also contribute to maintaining the overall upkeep of the vehicle. Regenerative braking means that mechanical friction brakes are only used in emergency situations, such as sudden stops, so there is far less need for maintenance. In addition, accessory components, including resistors, don’t require any maintenance, unlike the high cost of replacing brake pads and discs.

To increase a braking resistor’s dissipation capability, it’s important that the component is prevented from overheating. 

Water and air

The effect of temperature on a product’s performance is an important design consideration. Overheating can reduce the efficiency and longevity of components, and regulating this is critical.

From our experience, the challenge of managing temperature is critical when ensuring the efficiency of electric vehicles, and standard electrical items may not always fulfil this requirement. Electric brake resistors are well known in the domain of power electronics, railway or elevator technology to dissipate heat and slow down a mechanical system to avoid overheating. 

Most brake resistors are typically encased in a frame to create a safe distance between surrounding components. These frames feature a choice of either cooling fans or liquid coolants.

Air cooling has traditionally been the most common cooling method, as its fan technology is robust and able to withstand a significant amount of wear and tear without malfunctioning. If, for example, a single fin broke on the fan, it would still function safely.

This method of dissipating heat does, however, come with its limitations. Air fans create an additional source of noise, which interferes with the quiet running that is typically one of an EV’s benefits. Using a fan also means that its enclosures are generally bulkier and take up more space, which limits the range of vehicles that can use it. Air-cooling fans are further limited by their reliance on ambient temperatures to cool down heating components, which impacts the consistency of their efficiency. 

On the other hand, water-cooled resistors, such as Cressall’s EV2, can be easily integrated into existing cooling systems and are able to deliver cooling to areas where fans often fall short. Pipes containing a liquid coolant circulate around an enclosure and out of the device to help keep components cool using the principal of heat exchange.

Excess heat is thermally conducted by the water in the pipes, which is transferred out of the device and regenerated for other purposes. As the water can be stored in pipes at temperatures below the application’s ambient level, cooling can happen faster and with greater reliability.

The efficiency of air-cooled fans also depends on the size of the application. Manufacturers may need to integrate multiple fans, instead of just one, if they are being used to cool components in large electric vehicles such as trucks and buses. As water has a high heat conductivity, a water-cooled resistor only requires a single pump. This significantly lowers energy consumption and overall cost, while increasing the amount of space left inside the vehicle.

The new norm

With the electric vehicle market continuing to flourish, EVs are no longer a new concept. While there is still a way to go before our entire transport system is electrified, manufacturers need to work to make sure that vehicles meet efficiency targets.

We’re no longer only electrifying commercial vehicles. If the planet is to truly feel the impact of the move away from petrol and diesel, all vehicles on our roads need to undergo an upgrade. For this to happen, vehicle technology needs to keep pace. It isn’t all about batteries. Other components, such as braking resistors, must also be perfected in order to maximise the drive for greener roads.

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier