Analysis

Swissbit at electronica: Booth A6.421

28th October 2010
ES Admin
0
At electronica Swissbit will present its industrial DRAM memory modules in all popular technologies and the Flash products consisting of CF, SD, USB, PATA and SATA interfaces. One of the highlights is the F-100 Series CFAST™ Flash Storage Card. This 1” SDD (Solid State Drive) combines the original CompactFlash (CF) card form factor with a Serial ATA (sATA) interface. It is equipped with a reliable single level Cell Flash memory. This first generation reaches 105MB/s with 4 flash channels.
The new 2GB DDR2 Small Outline DIMM in Chip-on-Board technology has been designed especially for the use in Small Form Factor (SFF) Industrial PCs. This 200 pin SODIMM combines 1GB DDR2 dies with Winbond “buried wordline” process with Swissbit COB (chip on board) technology. Thus, the module becomes mechanically robust against shock and vibration. Due to the direct die attachment the heat dissipation is enhanced via the substrate and socket and by the extended surface. This keeps the DRAM chips at a lower die temperature under limited airflow conditions and increases the electrical performance.

The new X-200 Series SATA 2,5” SSD in Flash technology with SATA II-3GBit/s interface features an ideal memory solution for industrial portable applications. The modules also offer faster start-up and extremely short access times. Their extended temperature range and long life cycle qualify them as first choice for the use in non-volatile, high reliable applications. The X-200 series of SSD Flash storage products are offered in densities from 4GB to 64GB with data transfer rates of up to 105MB/s.
Contact persons at the booth: Marion Reithmeier, Sales and Marketing Coordinator; Tommaso Rando, Vice President Sales EMEA, Swissbit AG

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier