Deeter add Modbus Gateway Integration to Wireless Sensor System

The Deeter Wireless Modbus Gateway communicates with the Modbus network via a RS485 port in slave mode; it coordinates the wireless sensor network and manages data acquisition from the sensors using the IEEE 802.15.4™ wireless protocol in the 2.4GHz ISM frequency band.

A Deeter Wireless Modbus Gateway may be installed as a component of a new control or measurement system or as an extension to an existing wired sensor system in order to add wireless connected sensors.
Alan Marsh, Sales Manager at Deeter Group Ltd. Comments; ” Modbus has become one of the most popular standard communications protocols used in process control and is now amongst the most commonly available means of connecting industrial electronic devices. Our new Modbus Gateway will allow customers to integrate Deeter Wireless Sensor products into existing or new control systems in locations where wireless has cost, safety and convenience advantages over conventional cable connected systems.”
Deeter Wireless products may be used indoors or outside and all are rated to IP64, have an operating temperature range of -20ºC to +70ºC and compliant to FCC part 15.

The Deeter Group’s comprehensive range of wireless sensors and network components may be used to remotely monitor temperature, pressure, flow, humidity, liquid level, float or proximity switches or any sensor connected to a 4-20mA control loop. Deeter wireless sensor networks are very versatile and can range from a simple single sensor measurement to complex multi sensor and multi-vendor systems with mixed sensor inputs and routers to extend wireless range and offer self-healing mesh networks.