Analysis

High power switch from Labtech Microwave

25th February 2008
ES Admin
0
One of the UK’s leading manufacturers of microwave component technology has launched a new high power switch aimed at the IFF (identification friend and foe) market. Designed for harsh environments, Labtech Microwave’s LMS902 SPDT (single pole double throw) narrowband switch operates in the 1 to 1.1GHz microwave range and has a power handling capacity of 500 Watts peak. The design provides less than 0.8dB insertion loss and more than 45 dB of isolation and has a switching speed of less than 1 microsecond. Typical of this application, the RF power is not applied during switching.
Commenting on the new product, Alistair Frier, business development manager of Labtech Microwave said: “Prior to the LMS902 our family of PIN (positive intrinsic negative) switches was aimed at the low and medium power, wide band switch markets. Following research in to current availability and in response to fulfilling a number of customer specifications we realised that our existing switch range could be developed further.

“The technical challenge was to combine the high power with acceptable switching speed. High power normally implies large devices to handle the associated current, which in turn leads to high capacitance components. This capacitance has to be charged or discharged to operate the device, placing constraints on the drive circuitry, which is optimised to achieve the desired switching time. In addition, to obtain high power it is usually necessary to move to an all-shunt design so that all devices can be mounted directly on the heat dissipating surface to reduce thermal effects and there is no series device limiting the power handing capacity. This has been achieved with the LMS902.”

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier