Grid Simulator - full digital, full 4-quadrant, full regenerative operation

Three powerful building blocks for your development- and test departments:



The new development TC.ACS Series: 4-Quadrant Grid Simulator Simulation port 3P + active N (4 outputs), voltage 0 – 280 V per phase Unit power 50 kVA, full 4-quadrant operation, full regenerative (feedback of energy to grid) Power upgrading in 50 kVA steps up to 700 kVA



State-of-the-art multilevel double inverter technology allowing for highest efficiency both in source and sink operation.



Further characteristics:



• Frequency range 16 – 1000 Hz (fundamental wave), DC operation possible



• Modulation bandwidth 0 – 3000 Hz



• Allows for test procedures according to EN- and country standards



• 4-quadrant-amplifier operation, “hardware-in-the-loop” possible



• Comprehensive application software ACSControl



TopCon Quadro Series: DC Power Supplies



Voltages from 52 VDC up to 1200 VDC, in series connection up to 1500 VDC. Power from 10 kW up to 1.2 MW modular, full digital, full programmable, user-definable series / parallel / matrix connection.



##IMAGE_2_C##



Worldwide field-proven in e.g.:

• Real time simulation of solar arrays of any order

• Simulation of energy-, onboard- and storage systems

• Demanding DC supply tasks, laboratory applications

• Optional application software TFEAAP, SASControl





TC.GSS Series: Regenerative DC Source / Sink Systems

Voltages 400 / 500 / 600 VDC, in series connection up to 1500 VDC

Power from 20 kW up to 1.2 MW modular

Full digital, full programmable

PFC functionality, user-definable series / parallel / matrix connection



Worldwide field-proven in e.g.:

• Simulation of batteries and bidirectional storage systems

• Programmable tests of battery systems, micro- and full cycling

• Programmable tests of drive trains, hybrid technology

• Optional application software BatControl, BatSim