Analysis

Advanced MPPC Semiconductor Detector Technology for Photon Counting Applications

3rd September 2008
ES Admin
0
Hamamatsu Photonics has expanded their range of semiconductor detectors featuring photon detection capability with the introduction of the brand new S10362-33(X) series multi-pixel photon counter (MPPC). The new device utilizes a Geiger-mode avalanche photodiode structure for ultra-low-level light detection, and the active area has been increased almost ten times from 1 mm2 to 9mm2. The MPPC is easily connected to an external circuit for simple operation and is operated from a low voltage power supply (typically 70 Volts).
The S10362-33(X) series is ideal for a variety of applications, including positron emission tomography, high-energy physics, DNA sequencing, fluorescence measurement, nuclear medicine, point of care systems, drug discovery, medical diagnostic equipment and environmental analysis.

The S10362-33(X) series, with its active area of 3 mm x 3 mm, is available in three pixel counts (900, 3600, or 14400 pixels). Each pixel contains a quenching resistor so that simultaneous photon events can be counted separately and with a high degree of accuracy. The devices feature typical gain values from 250,000 to several million, depending on the specific pixel number. They also feature high photon detection efficiency to UV and blue light, with peak sensitivity at 400 nm, making them ideal for scintillator readout.

Hamamatsu also offers a compact MPPC module, the C10507-33(X) series. The modules consist of an MPPC device, current-to-voltage converter circuit, high-voltage power supply circuit, high-speed comparator circuit, counter circuit, and microprocessor. The threshold level for photon detection can be adjusted on a PC, which connects to the module via USB interface.

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier