Eco Innovation

Government needs to accept the engineering realities of scaling up low-carbon hydrogen

5th September 2022
Kiera Sowery
0

The UK government must capture the opportunities presented by low-carbon hydrogen and scale up its production, according to a report published by the National Engineering Policy Centre (NEPC), a partnership of 42 professional engineering organisations which the IET is part of.

  • Hydrogen likely to play a critical role in a net zero energy system according to National Engineering Policy Centre
  • The UK needs to act swiftly on hydrogen to avoid falling behind international competitors
  • Report outlines key risks and uncertainties that must be addressed if hydrogen production and use is to be low-carbon

The report highlights risks associated with rapid scale up of low-carbon hydrogen production that must be managed to make the most of hydrogen’s potential to contribute to net zero, such as fugitive emissions from fossil fuel extraction and key dependencies on requisite technologies including carbon capture and storage (CCS), renewable electricity and electrolysers. 

Hydrogen is likely to play a critical role in achieving net zero, according to the report, which identifies two key requirements that the UK would need to fulfil in the next few years if low-carbon hydrogen is to be successfully scaled up as part of a net zero energy system:

  • Achieve a rapid scaling up of low-carbon hydrogen infrastructure focusing on end uses where the greatest gains can be made from a whole-system decarbonisation perspective.
  • Manage the risks and dependencies when scaling up hydrogen value chains – including leakages, safety and public trust, skills gaps, cost uncertainties, regulations, blue and green hydrogen competition, and embodied carbon in infrastructure.

Roger Kemp, member of the IET’s Energy Panel, and contributor to the NEPC report, said: “Hydrogen will be an essential component of the UK’s future energy system, but unthinking widespread adoption could saddle consumers with an inflexible and expensive commitment.

This report discusses how best to use hydrogen to balance risks, costs and climate changing emissions.

“How to achieve Net Zero is a seriously complex problem. Unlike fossil-fuel power stations which can be switched on or off with a few hours warning, most renewables in the UK are available only when the wind is blowing, the sun is shining or tides are flowing.

“Hydrogen unlocks a means of storing energy from when it’s available to when it’s needed. It also offers a way of using natural gas for domestic heat, while capturing the carbon dioxide. However, these processes are significantly less efficient and more expensive than using the energy directly.

Not investing enough in energy storage could result in prolonged energy starvation during a long windless period in winter: a gung-ho approach to using hydrogen for everything would see energy costs well above those anticipated in the next six months.”

Simon Harrison, past chair of the IET’s Energy policy Panel and another contributor to the NEPC report, added: “This report is an important contribution to the debate around hydrogen – a subject potentially critical to net zero greenhouse gas emissions in the UK and elsewhere, and one where much is said, but often uninformed by the physics and engineering that will underpin its success.

“It also seeks to address this gap in engineering-led thinking, looking at hydrogen from a whole systems perspective, and exploring the challenges and opportunities of its possible use within the energy system.

It builds on work published by the IET and other professional institutions in our 2019 report ‘Transitioning to Hydrogen’. It is important now that policy decisions regarding hydrogen within the whole energy system are taken at pace.”   

The report examines the suitability of hydrogen for major applications across the economy, including industry, power, transport and heat and buildings.

It recommends that while the best use of low-carbon hydrogen has yet to be determined, low-carbon hydrogen should be available for the end uses in which hydrogen deployment has the potential to become the best or only low- or zero-carbon option available.

The NEPC’s analysis highlights, for example, that hydrogen is likely to become the most effective or the only viable decarbonisation option for some end uses such as primary steelmaking, industrial heating and as a chemical feedstock for industrial process.

This will maximise hydrogen’s value to decarbonisation of the whole energy system and to closing the emissions gap to put the UK on track with its Fifth and Sixth Carbon Budgets and the 2050 net zero target.

The role of hydrogen in a net zero energy system also advocates a region-specific approach to developing local hydrogen economies, with low-carbon hydrogen production and end use initially focused on industrial clusters where current production and use of grey hydrogen (produced using steam methane reforming) is already located.

These clusters represent early opportunities to accelerate the UK’s transition towards low-carbon hydrogen including blue hydrogen (produced by steam methane reforming coupled with carbon capture and storage - CCS) and green hydrogen (produced by electrolysis using renewable electricity).

It suggests that once low-carbon hydrogen production capacity and infrastructure has been sufficiently scaled up in these clusters, hydrogen deployment can be expanded to more widespread use in the energy system.

The extent of hydrogen deployment will vary significantly across different regions but will need to keep pace with the development of the infrastructure, supply chains, skills and services needed for low-carbon hydrogen production and use.

Other policy recommendations outlined in the report include:

  • Developing and implementing an ambitious but pragmatic roadmap for how low-carbon hydrogen production is to be scaled up to meet demand, with details about the contributions of each type of hydrogen production, including taking a whole system approach to the scaling up of key requisite technologies (ie CCS, renewable electricity generation, and electrolysers).
  • Investigating and ensuring the safety of hydrogen through further safety assessments. Outcomes of the safety assessments should be used to establish safety standards to safeguard health and safety as hydrogen production, transportation, storage, and end use scale up in society. At the same time, the government should ensure meaningful public engagement and stakeholder engagement as the hydrogen value chain develops.
  • Implementing stringent, outcome-oriented low-carbon hydrogen standards that include emissions throughout the whole production and supply process to ensure a low level of CO2 per unit of hydrogen. These standards must incentivise engineering solutions for leakages in hydrogen infrastructure to minimise the atmospheric greenhouse effects of hydrogen and apply to any imports to avoid the risk of offshoring emissions.

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier